[Pansophy] New SOTR/ NCR dispositioner for L2HE-Cavities

[Tony Reilly]

Anne,

Please refer to my email.

Thanks,
Tony
________________________________
From: E. Anne McEwen <mcewen at jlab.org>
Sent: Thursday, May 6, 2021 9:34 AM
To: SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>
Cc: Katherine Wilson <kwilson at jlab.org>; Tiffany Ganey <ganey at jlab.org>; Tony Reilly <areilly at jlab.org>; Jacob Harris <jharris at jlab.org>; Valerie Bookwalter <bookwalt at jlab.org>
Subject: New SOTR/ NCR dispositioner for L2HE-Cavities


Hi Pansophy Team



Could you please replace Ari Palczewski  (Ari has left the lab)  in the HE Cavity Travelers –with  John Vennekate (hannesv at jlab.org)   based on Katherine’s message below (includes  travelers like  L2HE-INSP-CAV, VTA etc. )



I assume that with Katherine being the CAM, that her name would also be a back up for NCR /Traveler approvals



Katherine – I assume you will be letting John know ?



Thanks Anne



From: Katherine Wilson <kwilson at jlab.org>
Sent: Thursday, May 6, 2021 9:26 AM
To: E. Anne McEwen <mcewen at jlab.org>; Tiffany Ganey <ganey at jlab.org>
Cc: Tony Reilly <areilly at jlab.org>
Subject: Re: HE Cavities 040, 295 and 331



Let's go with John V until Bob protests how much of his time we're taking...



________________________________

From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Thursday, May 6, 2021 9:24 AM
To: Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>; Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Cc: Tony Reilly <areilly at jlab.org<mailto:areilly at jlab.org>>
Subject: RE: HE Cavities 040, 295 and 331



Hi Katherine



So whose names should be approving NCRs etc ? usually it’s the SOTR



Your name is likely already there  however do we need to add , John Vennekate and perhaps also Tiffany ?



Thanks Anne



From: Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>
Sent: Thursday, May 6, 2021 9:21 AM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>; Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Subject: Re: HE Cavities 040, 295 and 331



I agree with everything Tiffany said.



We are making John V the SOTR, but he will primarily be responsible for physics-level technical issues (such as participating on the cavity technical board).  As you know, Charlie starts phased retirement June 1, and will be moving away from HE work.  Tiffany will be providing valuable support in overseeing the day-to-day movement of the cavities, and I will be coordinating and problem solving as necessary.



Thanks,
Katherine





________________________________

From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Thursday, May 6, 2021 8:11 AM
To: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Cc: Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>
Subject: RE: HE Cavities 040, 295 and 331



Thanks Tiffany !



Best wishes – Anne



From: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Sent: Thursday, May 6, 2021 7:41 AM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Subject: RE: HE Cavities 040, 295 and 331



Good morning Anne,



I believe that Katherine is the SOTR.  I am just helping get the cavities moved through the work centers since I am on site most days.



I have an email between Katherine, Ari, and myself about the measurements needed for these cavities though.  The traveler is L2HE-INSP-CAV.

-          295 and 331 had an inspection done as part of the L2PRD project and so do not need another full inspection.  These cavities need a visual and de-mag measurement only.  Use a D3 on the L2HE-INSP-CAV to document what measurements were done and that the previous data is in the L2PRD-CAV-INSP-CAV travelers – TRAVID #97 for CAV295 and TRAVID #113 for CAV331.

-          040 has not had an inspection done as part of the L2PRD project and so a full set of measurements are needed for this cavity.  It appears that a L2HE-INSP-CAV traveler was started for 040 but no data has been entered. I believe that some of the fields in the L2HE-INSP-CAV traveler will not be able to be filled out since the cavity is not straight from the vendor.  This should be noted in the D3.



Any additional L2PRD cavities that we do will follow this same process:

-          If the cavity had a full L2PRD-CAV-INSP-CAV traveler completed as part of the L2PRD project and the current L2HE RFIN does not show any issues, a visual and de-mag only will be required, and the previous data traveler ID should be noted in the D3.

-          If the cavity did not have a full INSP traveler completed as part of the L2PRD project, the L2HE-INSP-CAV should be filled out to the extent possible and any data unable to be filled in should be noted in the D3.

-          When cavities for the L2HE project begin arriving from the vendor, the L2HE-INSP-CAV traveler should be filled out in full.



Tiffany Ganey



From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Wednesday, May 5, 2021 5:14 PM
To: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Subject: HE Cavities 040, 295 and 331



Hi Tiffany



I think that you might be the new SOTR for HE Cavities , taking over from Ari ?



If this is the case, could you advise what measurements are needed on the HE Cavities 040, 295 and 331 , and which HE traveler we should be using – my recollection was it was to be only a subset of the dimensions needed for the new production cavities



Thanks for your help



Anne



_______________________________________________________________________________

E. Anne McEwen

JSA / Jefferson Lab

SRF Institute

Newport News, VA 23606

Office: +1 (757) 269-5539

Email:   mcewen at jlab.org<mailto:mcewen at jlab.org>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210506/9daa2366/attachment-0001.html>