[Pansophy] Traveler ID for the SPQA Magnet Components

[Lakshmi Lalitha]

Hi Mike,
Visual inspection and EBOM  inspection are required.
I will make a note that we need to engrave the part number. As you have suggested, I will request the inspection team to notify you in advance for engraving the parts at the test lab.

Pansophy Team,
What is the ID that I need to use for this traveler?

Thanks
Lakshmi


From: Mike Dickey
Sent: Thursday, May 6, 2021 9:14 AM
To: Lakshmi Lalitha <lalitha at jlab.org>; pansophy at jlab.org
Cc: srfinv at jlab.org
Subject: RE: Traveler ID for the SPQA Magnet Components

Hi Lakshmi,

All of these clamps have been received and are being stored at the Bluecrab warehouse.  The parts would need to be engraved with PartNumber-Rev-SN, and have acronyms assigned.  If we are given sufficient notice from the inspection team, it would be better to bring them to the Test Lab a few days early for engraving.

I know there were some issues with PLATE, WIRE CONNECTING (F10036756) for the L2PRD project.  Besides verifying the plates are correct, what other aspects of these parts do you plan to have inspected?

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Lakshmi Lalitha <lalitha at jlab.org<mailto:lalitha at jlab.org>>
Sent: Wednesday, May 5, 2021 5:20 PM
To: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>; pansophy at jlab.org<mailto:pansophy at jlab.org>
Cc: Lakshmi Lalitha <lalitha at jlab.org<mailto:lalitha at jlab.org>>
Subject: RE: Traveler ID for the SPQA Magnet Components

Hi Mike,
The part numbers for the thermal intercepts are

  1.  2K clamp assembly: F10040841
  2.  5K clamp assembly: F10045236
  3.  50 K clamp assembly: F10046443
The Quad clamp part number is F10042265

The part manufacturing drawings are also attached.

Lakshmi

From: Mike Dickey
Sent: Tuesday, May 4, 2021 3:03 PM
To: Lakshmi Lalitha <lalitha at jlab.org<mailto:lalitha at jlab.org>>; pansophy at jlab.org<mailto:pansophy at jlab.org>
Subject: RE: Traveler ID for the SPQA Magnet Components

Hi Lakshmi,

Do you know the part numbers (drawings) for these parts?

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Pansophy <pansophy-bounces at mailman.jlab.org<mailto:pansophy-bounces at mailman.jlab.org>> On Behalf Of Lakshmi Lalitha
Sent: Tuesday, May 4, 2021 11:10 AM
To: pansophy at jlab.org<mailto:pansophy at jlab.org>
Cc: Lakshmi Lalitha <lalitha at jlab.org<mailto:lalitha at jlab.org>>
Subject: [Pansophy] Traveler ID for the SPQA Magnet Components

Dear Pansophy Team,
To my knowledge, the LCLS-II project did not have any traveler for (a) SPQA magnet thermal intercepts (2K, 4K, and 5K components) and (b) SPQA magnet clamps.

I would like to have an inspection traveler for these components. I am currently working on item#a. Could you please help me assign an appropriate traveler ID.

Thank you,
Lakshmi


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210507/18f39d82/attachment.html>