[Pansophy] L2HE-INSP-QUAD-R1 has been Disapproved

[Megan McDonald]

Lakshmi,

Here are Michael's  comments from the disapproval. These should have been in the disapproval email that Allen forwarded to you

Michael Morrone Comments:
Hey Allen,
I found some possible discrepancies in the traveler.
1. Step 3.5.1 Voltage tap wires inspection requirement listed says should be between 10 to 20 ohms.
3.5.1.2. Q- to VT2 on previous LCLSII magnets spec was 141 ohms (way above new spec given above)
3.5.1.3. HD- to VT3 on previous LCLSII magnets spec was 9.0 ohms (below new spec given above)
3.5.1.5. VD- to VT5 on previous LCLSII magnets spec was 9.0 ohms (below new spec given above)
And 3.8.12. Did RTDs pass the tests? No spec was given in the traveler to determine if recorded values have passed or failed?
Everything else looks good.
Thanks,
Michael

Megan


From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Lakshmi Lalitha
Sent: Tuesday, October 26, 2021 5:47 PM
To: Michael Morrone <morrone at jlab.org>
Cc: Lakshmi Lalitha <lalitha at jlab.org>; pansophy at jlab.org
Subject: Re: [Pansophy] L2HE-INSP-QUAD-R1 has been Disapproved

Hi Michael,
I sent you this traveler for your review, and obtained your feedback, and answered your queries before finalizing the traveler and routing for approval.

I see that the traveler was disapproved today. Can you let me know the reason for disapproval or any questions or suggestions you may have that need to be addressed or incorporated further into the updated version of the traveler

Thanks
Lakshmi



From: Valerie Bookwalter
Sent: Tuesday, October 26, 2021 5:06 PM
To: Lakshmi Lalitha <lalitha at jlab.org<mailto:lalitha at jlab.org>>; Michael Morrone <morrone at jlab.org<mailto:morrone at jlab.org>>
Cc: pansophy at jlab.org<mailto:pansophy at jlab.org>
Subject: L2HE-INSP-QUAD-R1 has been Disapproved

Please make corrections and submit ASAP for the L2HE PRR. Thank You

Valerie Bookwalter
Jefferson Lab, SRF Department
Pansophy Team
1-757-269-5802 (OFFICE - currently working offsite)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20211027/e8841417/attachment.html>