[Pansophy] C75 vs NB3SN travelers

[E. Anne McEwen]

Hello Pansophy Team ,

FYI-  It looks like the SN for NBSN are appearing in more than one Cavity Inspection Traveler (in both C75 and NB3SN )

Aaron is assuming we should use NB3SN

Anne

From: Earl Mosby <mosby at jlab.org>
Sent: Tuesday, September 21, 2021 12:12 PM
To: George DeKerlegand <georged at jlab.org>; E. Anne McEwen <mcewen at jlab.org>
Subject: RE: Tie In

Got it.
Strange that Pansophy put the serial numbers for the NbSN1 & NbSN2 cavities in the C75 traveler dropdown.
I did not know it was under the WFO tab....

Earl


From: George DeKerlegand<mailto:georged at jlab.org>
Sent: Tuesday, September 21, 2021 10:37 AM
To: Earl Mosby<mailto:mosby at jlab.org>; E. Anne McEwen<mailto:mcewen at jlab.org>
Subject: Re: Tie In

Hi Earl,

Thanks for info. I re-measured the cavity and it improved. The Fp end is now out .004" and FPC end is out of tol. .003" I will bend cavity again this morning. FYI it look like in pansophy NB3SN project has it's own home for data under "WFO" tab in pansophy. I believe this project data should be separated from C75.

Thanks,
Aaron

From: Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>
Sent: Monday, September 20, 2021 7:35 PM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>
Subject: Tie In


Hi Anne & Aaron,

I have bent  C75 NbSN1.  I have the BT flanges within .004" in one direction and .003" 90° from CMM setup.

I think it is close enough to run.  I don't have time to run the program.  I sent an email to Roland to let him know that it needed bending.



Regards,



Earl

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210921/6cc22d92/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 7911715B008E4AE5A29D4AED9BE467E9.png
Type: image/png
Size: 144 bytes
Desc: 7911715B008E4AE5A29D4AED9BE467E9.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210921/6cc22d92/attachment.png>