[Pansophy] Final Disposition: NCR:464 on SNSPPU-INSP-REC-R1--3

[Gary Cheng]

Hi pansophy team,

I accidentally closed this NCR. I thought it is for REC 1 but it is 
actually for REC 4. Please re-open this NCR.

Thanks,
Gary

On 1/7/2022 1:56 PM, CHENG at JLAB.ORG wrote:
>
> An Engineer has responded to the reworked/remeasured Non-Conformance 
> Report - sequence number 464 for traveler SNSPPU-INSP-REC-R1--3.
>
> *THIS NCR HAS BEEN AUTOMATICALLY CLOSED BASED ON DISPOSITION*
> *ENGINEER'S FINAL RESPONSE*
> Response Engr: 	CHENG
> Response Date: 	07-Jan-2022
> Disposition: 	Return To Vendor
> Disposition Comment: 	The bellows issues have been brought to the 
> vendor's attention. Due mainly to dimensional deviations, the REC 01 
> is determined unusable hence returned to vendor for rework
> *REWORK*
> Rework Staff: 	
> Rework Date: 	
> Rework Comment: 	
> Verify Staff: 	
> Verify Date: 	
> Verify Comment: 	
> *ENGINEER RESPONSE*
> Response Engr: 	
> Response Date: 	
> Disposition: 	
> Disposition Comment: 	
> *NCR PROBLEM DESCRIPTION*
> SN: 	004
> SNtype: 	RECSN
> DRAWING NUM: 	104210700-M8U-8200-A001
> PART DESCRIPTION: 	RETURN END CAN TOP ASSEMBLY
> TRAV_ID: 	SNSPPU-INSP-REC
> TRAV_REV: 	R1
> TRAV_SEQ_NUM: 	3
> DESCRIBE STAFF: 	MOSBY
> DESCRIBE DATE: 	2022-01-06 19:18:00.0
> DESCRIBE COMMENT: 	There are several dings around the outer 
> convolutions on the bellows assembly. See attached photos.
> NOTIFICATION COMMENT: 	
>
> The NCR is at the following URL: 464 
> <https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=SNSPPU&area=SNSPPU&system=INSP&TRAV_ID=SNSPPU-NCR&TRAV_REVISION=R12&page=4&maxpage=4&TRAV_SEQ_NUM=464&travstat=y&serialnum=004&SN=004&SNTYPE=RECSN> 
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20220107/55ee45b1/attachment.html>