[Pansophy] FW: MEPCV2 Documents

[Subashini De Silva]

From: Subashini De Silva <>
Sent: Monday, July 25, 2022 3:29 PM
To: Valerie Bookwalter <bookwalt at jlab.org>
Cc: pansophy <pansophy at jlab.org>; Earl Mosby <mosby at jlab.org>; E. Anne McEwen <mcewen at JLAB.ORG>
Subject: RE: MEPCV2 Documents

Hi Valerie,

Long time back we discussed about this but I didn't get to complete it.
Cavity is almost complete in fabrication.
There's still welding to do.

Here are a list what I am hoping to collect in terms of travelers.

  *   Welding - Adam are recording these somewhere. Can we link them to this cavity?
  *   CMM - Earl has done some CMM ins the past. I think the data are in SRF --> SRFRD --> SRFRD-INSR. And Earl/Aaron will be doing some next week.
  *   Chemistry - Bulk and light BCP, including thickness measurements.
  *   Furnace
  *   VTA Test

This would be the list. Please help me out in generating these travelers.

Thanks,
Suba

From: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>
Sent: Thursday, March 3, 2022 7:38 AM
To: Subashini De Silva <sdesilva at jlab.org<mailto:sdesilva at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>; E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Subject: Re: MEPCV2 Documents

Suba,

Thank you for letting us know about JLEIC.
We will let Earl know which traveler to use.
Approximately how many travelers do you expect for this project?
We need to determine if we should give you a separate area or put you under SRFRD project area as a sub-area.

Please let us know what help you need.

Valerie
________________________________
From: Subashini De Silva <sdesilva at jlab.org<mailto:sdesilva at jlab.org>>
Sent: Wednesday, March 2, 2022 3:31 PM
To: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>
Cc: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Subject: RE: MEPCV2 Documents


Hello Valerie and Allen,



The work on the JLEIC crab cavity was on hold for a while, and have finally resumed.

I haven't reviewed the travelers that Allen had sent, but will get to them in the coming weeks.

Currently Earl is doing CMM measurements of some of the parts and I would like to capture the data in pansophy.

Would you be able to create a traveler not with any specific entries, an open one so that Earl can upload the data.

Could you please discuss with Earl and create a traveler?



Also I am not planning to capture any machine shop information, as we have very limited budget. But will collect data and information from all the activities at test lab. I will contact you soon for the other travelers.



Thanks,

Suba



From: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Sent: Friday, October 22, 2021 5:24 PM
To: Subashini De Silva <sdesilva at jlab.org<mailto:sdesilva at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: MEPCV2 Documents



Subashini,



I apologize for the delay, here's the documents you asked for from the meeting. If you need any others, please don't hesitate to ask. I'll get the masterlist to you when it's complete.



Allen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20220725/dbfba6fd/attachment-0001.html>