[Pansophy] FW: C75-04 cavity serial numbers and IA-196 update

[Mike Dickey]

A topic for today's meeting. (See original message below).

My understanding is that this is requesting that the serial numbers for up to 3 parts (CAVSN, FPCEGSN, & HOMEGSN) should be added to 2 projects (C20 & C75).

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: E. Anne McEwen <mcewen at jlab.org>
Sent: Thursday, June 23, 2022 1:49 PM
To: Christiana Wilson <grenoble at jlab.org>; Earl Mosby <mosby at jlab.org>; George DeKerlegand <georged at jlab.org>; Roland Overton <overtonr at jlab.org>; Mike Dickey <mdickey at jlab.org>
Cc: Scott Williams <scott at jlab.org>; Kirk Davis <kdavis at jlab.org>; Tony Reilly <areilly at jlab.org>; Gianluigi Ciovati <gciovati at jlab.org>; SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>
Subject: RE: C75-04 cavity serial numbers and IA-196 update

Hello Christiana   & Mike

I noticed that Inventory was not copied so have added Mike Dickey & Pansophy , since they may need to add SN

Mike - I checked Pansophy and did not see these SN - so you might want to check that they are in the system . The end groups are checked for dimensional and the cavities checked for tuning before being cut off

Thanks Anne



From: Christiana Wilson <grenoble at jlab.org<mailto:grenoble at jlab.org>>
Sent: Thursday, June 23, 2022 1:38 PM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>; Roland Overton <overtonr at jlab.org<mailto:overtonr at jlab.org>>
Cc: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>; Kirk Davis <kdavis at jlab.org<mailto:kdavis at jlab.org>>; Tony Reilly <areilly at jlab.org<mailto:areilly at jlab.org>>; Gianluigi Ciovati <gciovati at jlab.org<mailto:gciovati at jlab.org>>
Subject: C75-04 cavity serial numbers and IA-196 update

Hi,
Here is a list of the cavity serial numbers from 1L10. Just to be clear, the cavity end groups will go to RI to build C75 cavities. These cavities will be put into C75-04. We are hoping to ship the endgroups to RI by the end of July.
IA-055
IA-152
IA-048
IA-001
IA-053
IA-034
IA-066
IA-157
The last pair is being removed today.
Two pair are in the tuning area and two are still in the cryounit assembly area.
IA-196 was brought to the clean room and still needs Qext measured before being sent to the machine shop.
Christiana
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20220627/d73c0e44/attachment.html>