[Pansophy] ER5C-VTA-DGLG-R1 Pansophy Issue

[Megan McDonald]

Ok it should work now! Let us know if you have any issues

Megan

From: Anthony Malave-Colon <acolon at jlab.org>
Sent: Tuesday, November 29, 2022 3:22 PM
To: Megan McDonald <megan at jlab.org>
Subject: RE: ER5C-VTA-DGLG-R1 Pansophy Issue

Correct. This is the Formula that is suppose to be in that traveler. When entering in the numbers its suppose to auto calculate, but it does not function. As far as I know this is not a change. Thanks again.

Anthony Malave Colon
SRF Electronic Fabrication Technician
12000 Jefferson Ave, Newport News, VA 23606
[JLabEmailSig]

From: Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>
Sent: Tuesday, November 29, 2022 3:20 PM
To: Anthony Malave-Colon <acolon at jlab.org<mailto:acolon at jlab.org>>; Justin Kent <jtkent at jlab.org<mailto:jtkent at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Subject: RE: ER5C-VTA-DGLG-R1 Pansophy Issue

Apologies for the delay. Is this the original formula that was supposed to be in the traveler or is this a change in the formula?

Megan

From: Anthony Malave-Colon <acolon at jlab.org<mailto:acolon at jlab.org>>
Sent: Tuesday, November 29, 2022 3:09 PM
To: Justin Kent <jtkent at jlab.org<mailto:jtkent at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>; Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>
Subject: RE: ER5C-VTA-DGLG-R1 Pansophy Issue

Just wanted to follow up on this email. The formula is still not working, and I am not able to select my name as a Technician. Thank you.

Anthony Malave Colon
SRF Electronic Fabrication Technician
12000 Jefferson Ave, Newport News, VA 23606
[JLabEmailSig]

From: Justin Kent <jtkent at jlab.org<mailto:jtkent at jlab.org>>
Sent: Monday, November 14, 2022 3:07 PM
To: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>; Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>; Anthony Malave-Colon <acolon at jlab.org<mailto:acolon at jlab.org>>
Subject: ER5C-VTA-DGLG-R1 Pansophy Issue

Greetings,


I was filling out a new traveler, after testing the new dogleg in the VTA today, and noticed an error with B1, B2, and Q0 calculations.  Before the project shift, all three of these numbers were calculated using the data measured from the Ql, S11, S11off, S22, and S22off.  The formulas are listed below for each value.  I would like this change made back to the traveler to prevent any miscalculation errors.



Β1=(1-(S11/S11'))/(1+(S11/S11'))

Β2=(1-(S22/S22'))/(1+(S22/S22'))
Q0 = QL(1 + Β1+ Β2)




Also, Anthony Malave-Colon needs to be added to the technician list for ER5C traveler work.


Thanks,
Justin

Justin Kent
VTA Operations Enigneer
Jefferson Science Associates, LLC
12000 Jefferson Ave
Newport News, VA 23606
O:(757)269-7150


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20221129/a40c3895/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 2880 bytes
Desc: image001.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20221129/a40c3895/attachment.png>