[Pansophy] BLBS D3

[Allen Samuels]

Okay so your account is working, but you don't have access to those folder areas. If you don't mind me asking, what are you needing to do in those areas?

From: Katherine Wilson <kwilson at jlab.org>
Sent: Friday, December 8, 2023 10:45 AM
To: Allen Samuels <samuels at jlab.org>; Michelle Oast <weinmann at jlab.org>; Adam Grabowski <adamg at jlab.org>; Kara Chandler <karac at jlab.org>
Cc: E. Anne McEwen <mcewen at jlab.org>; pansophy <pansophy at jlab.org>; Tony Reilly <areilly at jlab.org>
Subject: Re: BLBS D3

Hi Allen, I can log into Pansophy, but it says I don't have access to PPU, HE or EIC.

Thanks,
Katherine
________________________________
From: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Sent: Friday, December 8, 2023 10:08 AM
To: Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>; Michelle Oast <weinmann at jlab.org<mailto:weinmann at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>; Kara Chandler <karac at jlab.org<mailto:karac at jlab.org>>
Cc: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>; Tony Reilly <areilly at jlab.org<mailto:areilly at jlab.org>>
Subject: RE: BLBS D3


Hi Katherine. I'm looking through some emails I missed while I was out over thanksgiving. Were you helped with this, or are you still unable to access pansophy?



Allen



From: Pansophy <pansophy-bounces at mailman.jlab.org<mailto:pansophy-bounces at mailman.jlab.org>> On Behalf Of Katherine Wilson via Pansophy
Sent: Tuesday, November 21, 2023 1:06 PM
To: Michelle Oast <weinmann at jlab.org<mailto:weinmann at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>; Kara Chandler <karac at jlab.org<mailto:karac at jlab.org>>
Cc: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>; Tony Reilly <areilly at jlab.org<mailto:areilly at jlab.org>>
Subject: Re: [Pansophy] BLBS D3



Hi all, I no longer have access to Pansophy.  If someone wants to restore my privileges, I'd be happy to take a look.



Thanks,

Katherine



________________________________

From: Michelle Oast <weinmann at jlab.org<mailto:weinmann at jlab.org>>
Sent: Tuesday, November 21, 2023 10:03 AM
To: Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>; Kara Chandler <karac at jlab.org<mailto:karac at jlab.org>>; Katherine Wilson <kwilson at jlab.org<mailto:kwilson at jlab.org>>
Cc: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Subject: RE: BLBS D3



Thanks Adam,

There's nothing in the traveler about the dent and no NCR was filed, inspection was done by Kara.  https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=L2HE&area=L2HE&system=INSP&TRAV_ID=L2HE-INSP-BLBS&TRAV_REVISION=R3&page=1&maxpage=1&TRAV_SEQ_NUM=11&ncr_num=.&travstat=y&serialnum=020&SN=020&SNType=BLBSSN

The traveler states: "Create an NCR for any dents/dings that exceed 1/8". If a single ding or dent is under 1/8" do not create an NCR but leave a comment."

Kara - do you remember seeing a small dent in the convolutions of BLBS 020?  D3 has photos: https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=L2HE&area=L2HE&system=D3&page=1&SNType=SerialID&trav_id=L2HE-D3&maxpage=1&trav_revision=R3&trav_seq_num=141&travstat=n&serialnum=J1.3-28&SN=J1.3-28

That being said, it's a very small and shallow dent and the edges are smooth.  Katherine - since this dent is in the convolutions I want to get your input.  Thanks,

Michelle



From: Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Sent: Tuesday, November 21, 2023 9:47 AM
To: Michelle Oast <weinmann at jlab.org<mailto:weinmann at jlab.org>>
Subject: Re: BLBS D3



Michelle, I called the clean room (x7335) to get the s/n, it is 020.



Adam Grabowski

SRF Test Engineer, L2HE Project CAM

Jefferson Lab
600 KELVIN DR Suite # 8

Mail Stop 55H
Newport News, VA 23606

O: 757-269-7665

C: 360-320-7003

E: adamg at jlab.org<mailto:adamg at jlab.org>

________________________________

From: Michelle Oast <weinmann at jlab.org<mailto:weinmann at jlab.org>>
Sent: Tuesday, November 21, 2023 9:40 AM
To: Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Subject: BLBS D3



Hi Adam,

In the D3 that was filed this morning I can't find the SN for the bellows that's photographed.  It's not in any of the photos and the part identification was filled out as a CM, not a BLBS.  However, I can guess that it's either SN 013 or 014.  Either way all inspections have been completed and no NCRs have been filed for convolution dents, I also don't see anything about the dent in any of the remaining travelers.  However, there is an existing NCR for a similar issue that was found on SN 001; it actually looks worse on 001 than the one in the D3.  I think it's likely ok.

https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=L2HE&area=L2HE&system=&TRAV_ID=L2HE-NCR&TRAV_REVISION=R12&TRAV_SEQ_NUM=281&serialnum=001&page=1&maxpage=4&travstat=y

Let me know your thoughts,

Michelle
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20231208/5de33c2e/attachment-0001.html>