[Pansophy] Final Disposition: NCR:636 on SNSPPU-CMA-SEC-INSP-R3--7

[Gary Cheng]

Thanks Allen!

I noticed that for some reason, the photos that John uploaded are not 
showing up properly. Do you see the same issue? I tried in Firefox and 
Chrome, same no-show problem



Thanks,
Gary

On 2/6/2023 9:56 AM, Allen Samuels wrote:
>
> SNSPPU NCR Sequence 636 has been reopened.
>
> Allen
>
> *From:*Valerie Bookwalter <bookwalt at jlab.org>
> *Sent:* Monday, February 6, 2023 9:48 AM
> *To:* Allen Samuels <samuels at jlab.org>
> *Cc:* pansophy <pansophy at jlab.org>
> *Subject:* FW: Final Disposition: NCR:636 on SNSPPU-CMA-SEC-INSP-R3--7
> *Importance:* High
>
> Allen,
>
> Can you please open this traveler. Thanks
>
> Valerie
>
> *From:*John Fischer <fischer at jlab.org <mailto:fischer at jlab.org>>
> *Sent:* Monday, February 6, 2023 8:09 AM
> *To:* Valerie Bookwalter <bookwalt at jlab.org 
> <mailto:bookwalt at jlab.org>>; Gary Cheng <cheng at jlab.org 
> <mailto:cheng at jlab.org>>
> *Subject:* FW: Final Disposition: NCR:636 on SNSPPU-CMA-SEC-INSP-R3--7
>
> Did this get resolved?
>
> JF
>
> *From:*John Fischer
> *Sent:* Friday, February 3, 2023 4:30 PM
> *To:* Gary Cheng <cheng at jlab.org <mailto:cheng at jlab.org>>; Valerie 
> Bookwalter <bookwalt at jlab.org <mailto:bookwalt at jlab.org>>
> *Subject:* RE: Final Disposition: NCR:636 on SNSPPU-CMA-SEC-INSP-R3--7
>
> Valerie,
>
> Please open the NCR. I closed too fast.
>
> Sorry Gary. Keep up!!!! lol
>
> JF
>
> *From:*Gary Cheng <cheng at jlab.org <mailto:cheng at jlab.org>>
> *Sent:* Friday, February 3, 2023 4:23 PM
> *To:* John Fischer <fischer at jlab.org <mailto:fischer at jlab.org>>
> *Subject:* Re: Final Disposition: NCR:636 on SNSPPU-CMA-SEC-INSP-R3--7
>
> You acted too fast to close the NCR!
>
> I was trying to give the reason on making a new block and attach the 
> drawing for the new block. Here is what I wrote (didn't get a chance 
> to post :P):
>
> "Because the support block needs to be shorter than a normal 5.50" 
> long block and there isn't enough length at either end of the block to 
> trim and still keep enough thread depth, we decide to make a new 
> support block of 4.88" OVL. See attached drawing"
>
> I understand that you are eager to get the SEC 4 traveler and NCR 
> closed. Your engineer is having difficult to catch up with your speed 😅
>
> Gary
>
> On 2/3/2023 4:12 PM, FISCHER at JLAB.ORG <mailto:FISCHER at JLAB.ORG> wrote:
>
>     An Engineer has responded to the reworked/remeasured
>     Non-Conformance Report - sequence number 636 for traveler
>     SNSPPU-CMA-SEC-INSP-R3--7.
>
>     *THIS NCR HAS BEEN AUTOMATICALLY CLOSED BASED ON DISPOSITION*
>
>     *PAGE 4: FINAL DISPOSITION*
>
>     Response Engr:
>
>     	
>
>     FISCHER
>
>     Response Date:
>
>     	
>
>     03-Feb-2023
>
>     Disposition:
>
>     	
>
>     Conforming
>
>     Disposition Comment:
>
>     	
>
>     Same as previous comment. End can is attached to the vacuum
>     vessel, welding is complete across interface block. Bayonet
>     positions to best fit beamline is within established tolerances.
>     Proceeding with cryomodule assembly.
>
>     *PAGE 3: MODIFICATION/RE-MEASURE*
>
>     Rework Staff:
>
>     	
>
>     JARED
>
>     Rework Date:
>
>     	
>
>     03-Feb-2023
>
>     Rework Comment:
>
>     	
>
>     New block installed, the fitment was good. End can welding to the
>     vacuum vessel complete. See pics in previous location.
>
>     Verify Staff:
>
>     	
>
>     FISCHER
>
>     Verify Date:
>
>     	
>
>     03-Feb-2023
>
>     Verify Comment:
>
>     	
>
>     Assembly is complete. alignment of bayonet to beam line best fit
>     is within tolerance.. Assembly to proceed.
>
>     *ENGINEER RESPONSE*
>
>     Response Engr:
>
>     	
>
>     FISCHER
>
>     Response Date:
>
>     	
>
>     03-Feb-2023
>
>     Disposition:
>
>     	
>
>     Hold/Modify
>
>     Disposition Comment:
>
>     	
>
>     *PAGE 2: FIRST DISPOSITION*
>
>     Response Engr:
>
>     	
>
>     FISCHER
>
>     Response Date:
>
>     	
>
>     03-Feb-2023
>
>     Disposition:
>
>     	
>
>     Hold/Modify
>
>     Disposition Comment:
>
>     	
>
>     Survey data provided the information needed to fabricate a new
>     block that would fit.
>
>     *PAGE 1: INITIATE AND DESCRIBE*
>
>     SN:
>
>     	
>
>     004
>
>     SNtype:
>
>     	
>
>     SECSN
>
>     DRAWING NUM:
>
>     	
>
>     104210600-M8U-8200-A001
>
>     PART DESCRIPTION:
>
>     	
>
>     SUPPLY END CAN ASSY
>
>     TRAV_ID:
>
>     	
>
>     SNSPPU-CMA-SEC-INSP
>
>     TRAV_REV:
>
>     	
>
>     R3
>
>     TRAV_SEQ_NUM:
>
>     	
>
>     7
>
>     DESCRIBE STAFF:
>
>     	
>
>     FISCHER
>
>     DESCRIBE DATE:
>
>     	
>
>     2023-02-03 15:59:00.0
>
>     DESCRIBE COMMENT:
>
>     	
>
>     Interface block did not fit between SEC04 and the vacuum vessel
>
>     NOTIFICATION COMMENT:
>
>     	
>
>     The NCR is at the following URL: 636
>     <https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=SNSPPU&area=SNSPPU&system=CMA&TRAV_ID=SNSPPU-NCR&TRAV_REVISION=R12&page=4&maxpage=4&TRAV_SEQ_NUM=636&travstat=y&serialnum=004&SN=004&SNTYPE=SECSN>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20230206/ae6cf26b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clfjhepflaanoahl.png
Type: image/png
Size: 23906 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20230206/ae6cf26b/attachment-0001.png>