[Pansophy] EIC Project Areas

[Mike Dickey]

Just a reminder, PRIMeS is not setup to handle raw stock.  I expect all raw stock to be controlled in the Niobium System.  The Nb system can handle Nb, NbTi, Cu, & Al, but not steel.

The dies should have drawing numbers and can be processed in PRIMeS.

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Philip Denny <denny at jlab.org>
Sent: Monday, February 13, 2023 10:35 AM
To: Naeem Huque <huque at jlab.org>; Mike Dickey <mdickey at jlab.org>; Valerie Bookwalter <bookwalt at jlab.org>
Cc: SRFINV at JLAB.ORG; pansophy <pansophy at jlab.org>; David Savransky <dsavr at jlab.org>
Subject: Re: EIC Project Areas

All,

Given the amount, size, and weights of various materials (Al, Cu, Nb, etc..) and in addition many dies needed for EIC, I am looking at setting up a cage or area specifically for EIC. Most likely in the TED bldg.

I know this doesn't answer your questions geared more toward database control, but I thought I would mention it.

Phil




________________________________
From: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Sent: Monday, February 13, 2023 10:27 AM
To: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>; Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>
Cc: SRFINV at JLAB.ORG<mailto:SRFINV at JLAB.ORG> <srfinv at jlab.org<mailto:srfinv at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>; David Savransky <dsavr at jlab.org<mailto:dsavr at jlab.org>>
Subject: Re: EIC Project Areas

Hi Mike,

I have only raw material coming in for EIC at the moment, but I believe David has actual flanges coming in (these are for both the two flavors of EIC, ellipticals and crabs). What do we need to start storing Nb and NbTi under EIC?

The cryomodule components are probably a year away and have no part numbers as yet.

Thanks,
Naeem
________________________________
From: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Sent: Monday, February 13, 2023 9:36 AM
To: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>; Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>
Cc: SRFINV at JLAB.ORG<mailto:SRFINV at JLAB.ORG> <srfinv at jlab.org<mailto:srfinv at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: EIC Project Areas


Hi Naeem,



As far as the production project for EIC, no, we don't even have a BOM yet or acronyms to match each of the varied, but similar parts (i.e., 5 different types of cavities, tuners, FPCs, spaceframes, vacuum vessels, etc.) for each of the 5 cryomodule configurations.



I will let Valerie address prototype areas for EIC.



Please keep in mind that acronyms WILL have to be discussed and agreed on prior to any parts arriving.



Mike Dickey

SRF Inventory Technician

Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755



From: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Sent: Saturday, February 11, 2023 3:59 PM
To: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>; Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Cc: SRFINV at JLAB.ORG<mailto:SRFINV at JLAB.ORG>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: EIC Project Areas



Hi Valerie and Mike,



We are going to start getting material coming in for EIC. Is there a plan to open up an area in PRIMeS and Pansophy for the project?



Thanks,

Naeem



Naeem Huque

Staff Engineer

Superconducting Radiofrequency (SRF)

Jefferson Lab

12000 Jefferson Ave

Newport News

VA, 23606

Cell: 217-721-5422
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20230213/144d7cf3/attachment-0001.html>