[Pansophy] Traveler revision

[Tiffany Ganey]

I'm not on site today.  You can either dial me into the conversation this morning, give me an email update later today, or I'll discuss with you on Monday.

Tiffany Ganey

From: John Vennekate <hannesv at jlab.org>
Sent: Wednesday, March 29, 2023 8:18 AM
To: Chris Dreyfuss <dreyfuss at jlab.org>
Cc: pansophy <pansophy at jlab.org>; Tiffany Ganey <ganey at jlab.org>
Subject: Re: Traveler revision

Good idea!
Shall we meet around 0930 in the running room?
________________________________
From: Chris Dreyfuss <dreyfuss at jlab.org<mailto:dreyfuss at jlab.org>>
Sent: Wednesday, March 29, 2023 7:53:57 AM
To: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>; Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Subject: RE: Traveler revision


Not sure I understand your question, the procedure says test stand not one kind but for all since they are mostly all setup the same, I would be happy to discuss while we have it open on a screen can do in tuning room if you want just let me know. Thanks



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows



From: John Vennekate<mailto:hannesv at jlab.org>
Sent: Tuesday, March 28, 2023 6:50 PM
To: Chris Dreyfuss<mailto:dreyfuss at jlab.org>
Cc: pansophy<mailto:pansophy at jlab.org>; Tiffany Ganey<mailto:ganey at jlab.org>
Subject: RE: Traveler revision



Hey Chris,



As Tiffany pointed out to me, the procedure does only cover a single test stand (plus I haven't really scanned it if it is still applicable to our current system).

Do you think it makes sense going through it and potentially revise it, as in adapt to current standards and extend for a D5 load?



Cheers,

John V



From: Chris Dreyfuss <dreyfuss at jlab.org<mailto:dreyfuss at jlab.org>>
Sent: Thursday, March 23, 2023 10:10
To: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>; Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



Here is the link to add to the procedure, it was written in 2020 so Megan is checking on weather it is usable under the ne system it may need some tweaking. https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-212740/CP-STP-VAA-TST-PUMPSL-R1.pdf





Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows



From: John Vennekate<mailto:hannesv at jlab.org>
Sent: Wednesday, March 22, 2023 4:58 PM
To: Allen Samuels<mailto:samuels at jlab.org>; Adam Grabowski<mailto:adamg at jlab.org>; Chris Dreyfuss<mailto:dreyfuss at jlab.org>
Cc: pansophy<mailto:pansophy at jlab.org>
Subject: RE: Traveler revision



Hey Allen,



Find my versions attached. Both travelers are still missing a link to the slow pumping procedure in their references section. @Chris Dreyfuss<mailto:dreyfuss at jlab.org> wanted to provide that.



Many thanks for the help!



John V





From: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Sent: Wednesday, March 22, 2023 08:24
To: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>; Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



Okay. When they are ready, put them into ready for approvals.



Allen



From: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Sent: Tuesday, March 21, 2023 5:21 PM
To: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>; Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



No, sorry, after re-reading the full traveler I realized there are some major flaws. I'll put together a new version tomorrow and will get back to you.



Thanks,

John V



From: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Sent: Tuesday, March 21, 2023 16:51
To: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>; Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



How are these?



Allen



From: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Sent: Tuesday, March 21, 2023 4:35 PM
To: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>; Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



Ok, that backfired.



Let me spell it out more:

@Allen Samuels<mailto:samuels at jlab.org>
1. You need to replace step 3 and 4 in the TSTD traveler with the ones from TSTD5.
                And change the 65 to a 100, i.e. "Set the RGA for an analog scan looking at mass 2 thru 100"

2. Next, you need to cut the following fields:
                [[CAVPosition1LkTight]] <<YESNO>>

[[CAVPosition2LkTight]] <<YESNO>>

[[CAVPosition3LkTight]] <<YESNO>>

3. Last, you should change the language and replace "cavities" with "cavity" as TSTD is only for one cavity each.

4. Please also edit TSTD5 so that step 4 reads "Set the RGA for an analog scan looking at mass 2 thru 100"





Thanks,

John V





From: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Sent: Tuesday, March 21, 2023 15:43
To: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>; Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>; John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



Thanks Allen.  I'll let John and/or Adam review and comment since they requested the traveler revision and are more aware of that's project requirements.



Tiffany Ganey



From: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Sent: Tuesday, March 21, 2023 3:37 PM
To: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Cc: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: Traveler revision



Tiffany,



Here's the L2HE-CLNRM-CAV-TSTD-R3 traveler I created. Please review it and make any changes you deem necessary. If the TSTD5 traveler also needs to be revised, we can make a new revision of that as well.



Allen



From: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Sent: Tuesday, March 21, 2023 2:10 PM
To: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Subject: FW: Traveler revision



Let me know if you need any more details on the job!





Cheers,

John V

-7607







From: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Sent: Tuesday, March 21, 2023 12:00
To: SRF Pansophy (pansophy at jlab.org<mailto:pansophy at jlab.org>) <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>; John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Subject: RE: Traveler revision



Allen - Are you able to make the revision to the L2HE-CLNRM-CAV-TSTD traveler as John describes below and route it for approval?



Tiffany Ganey



From: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Sent: Tuesday, March 21, 2023 11:20 AM
To: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Cc: Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>
Subject: Traveler revision



Tiffany,



Could you do me a favor and revise the L2HE traveler for the loading of a single test stand i.e. L2HE-CLNRM-CAV-TSTD?



What we basically need is to bring it in sync with the TSTD5 traveler. The main change is to keep the RAV closed if the cavity comes from the vendor and to close it if the cavity had to be pumped down.



You can more or less copy & paste from TSTD5 step 3 (last sentence) and step 4. (And I just realized that that one still says RGA 1 to 65 instead of 100, we should change that too on TSTD5).



We had not used the TSTD traveler for quite a while but it is being put in operation again!



Many thanks in advance!

John V




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20230329/11eef410/attachment-0001.html>