[Pansophy] Cavities from FNAL

[John Vennekate]

Someone with Vector access could pull that.

@Gary Cheng<mailto:cheng at jlab.org>, @Tiffany Ganey<mailto:ganey at jlab.org> Do you still have access to Fermi's system and could pull the latest test traveler for CAVR050 and -102?


Cheers,
John V
-7607



From: Ashley Mitchell <ashleya at jlab.org>
Sent: Friday, June 28, 2024 10:47
To: John Vennekate <hannesv at jlab.org>; pansophy <pansophy at jlab.org>
Cc: Adam Grabowski <adamg at jlab.org>
Subject: Re: Cavities from FNAL

John,

Is there a way to get the VTA data of those cavities from FNAL?  That way we could input it into a Traveler with a note that it was tested at Fermi instead of in-house, but then the data would link nicely for reports and pulling it for the big spreadsheet we have to deliver at the end too.

- Ashley
________________________________
From: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Sent: Friday, June 28, 2024 10:00 AM
To: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Adam Grabowski <adamg at jlab.org<mailto:adamg at jlab.org>>; Ashley Mitchell <ashleya at jlab.org<mailto:ashleya at jlab.org>>
Subject: Cavities from FNAL


Dear Pansophy-heroes,



I was informed that we had some probs with the last three qualified cavities Fermi sent us for J25 - HE-CAVR090, -115, -137 - i.e. issues with the drill downs.

We are expecting two more qualified cavities - HE-CAVR050 and -102 - from Fermi for our next string. Hence, I wanted to give you a heads-up. I'm planning to request an RF incoming and CMM inspection of the two, but we won't need any vertical testing etc..

As of now, we are only planning to use one of the two cavities and there is a good chance we'll send the other one back once J31 is completed. So far, I can't tell you which one.



Hope this helps preparing the system!

Best,

John V
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20240628/3c89893f/attachment.html>