[Pansophy] Traveler question

[Paige Wesley]

Hello and good morning! Christiana and I meet on Friday to discuss and try to find a work around for the limitation of only 21 spots on a processing traveler. The issue comes up when we are having to do re-work and end up having to move everything around on the traveler. We determined that having 3 separate processing travelers, each loosely following different "blocks" of the "C75 Production Process" tab on the SRF work center plan document, would allow for all travelers to be filled out without much movement elsewhere. We aren't doing it for all cavities this time around but were planning to test it out on the final one of this cycle, C75-RI-052. If this is a cause for concern or will be an issue please let me know.


Have a Great Day,
   Paige Wesley
________________________________
From: Valerie Bookwalter <bookwalt at jlab.org>
Sent: Tuesday, October 15, 2024 2:48 PM
To: Paige Wesley <paigew at jlab.org>; Christiana Wilson <grenoble at jlab.org>
Cc: pansophy <pansophy at jlab.org>; Tony Reilly <areilly at jlab.org>; Kirk Davis <kdavis at jlab.org>
Subject: Re: Traveler question

Paige,

I don't understand why there are 3 travelers open at the same time for the same cavity.
Can someone explain?
The intent of the PROC-CAV was to complete one before opening a new one.

The link problem can be fixed.

Valerie

________________________________
From: Pansophy <pansophy-bounces at mailman.jlab.org> on behalf of Paige Wesley via Pansophy <pansophy at mailman.jlab.org>
Sent: Tuesday, October 15, 2024 8:30 AM
To: pansophy <pansophy at jlab.org>
Cc: Christiana Wilson <grenoble at jlab.org>
Subject: [Pansophy] Traveler question

Hello and good morning! I had a few questions about the generic processing traveler for C75 (ID; ER5C-PROC-CAV). When creating a new one and selecting the cavity serial number, is there anyway to be able to type in a separate box a 3-letter acronym so that it would appear next to the serial number when looking at cavities in the drop-down menu? It's hard to word what I'm asking so I attached a photo below with an arrow pointing to where the acronym would appear.

Also, when linking a traveler within the generic processing travelers (same ID as above) they are all showing up with this error message below.

"Not Found
The requested URL was not found on this server.
________________________________
Apache/2.4.57 (Red Hat Enterprise Linux) Server at pansophy.jlab.org Port 443"

If my wording is confusing or you need further explanation don't hesitate to reach out![cid:4e8f6614-d28e-4b49-ae24-e621b90fb45e]
Have a Great Day,
   Paige Wesley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20241016/c9bfb730/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_3745.jpg
Type: image/jpeg
Size: 1378939 bytes
Desc: IMG_3745.jpg
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20241016/c9bfb730/attachment-0001.jpg>