[Pansophy] EIC197-PR-CHEM-CAV-ACID-R1

[Allen Samuels]

Understood, thank you Naeem.

Jacques, regarding EIC197-FAB-FPCWV-ASSY, where should both the master procedures go in the meat of the traveler?  I'm seeing it in steps 3a/b, 7, 11a/b, 15a/b, and 19. as a reminder, the master procedures used previously are SRF-MSPR-CHEM-NB-ACID-R1<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-261723/SRF-MSPR-CHEM-NB-ACID-R1.pdf> and SRF-MSPR-CHEM-FBH-DEGR-R1<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-261899/SRF-MSPR-CHEM-FBH-DEGR-R1.pdf>. The traveler is otherwise approved, so once we get this done I can work on getting it into pansophy.

Allen
________________________________
From: Naeem Huque <huque at jlab.org>
Sent: Tuesday, September 10, 2024 11:07 AM
To: Allen Samuels <samuels at jlab.org>; Justine Cox <blumer at jlab.org>; Jacques Barsimantov Mandel <jacquesb at jlab.org>
Cc: pansophy <pansophy at jlab.org>; Kirk Davis <kdavis at jlab.org>
Subject: Re: EIC197-PR-CHEM-CAV-ACID-R1

Hi Allen,

The new chemistry procedure is just for Justine's travelers. The others, including the ones you listed, can have the master procedures

Thanks,
Naeem
________________________________
From: Allen Samuels <samuels at jlab.org>
Sent: Tuesday, September 10, 2024 11:05 AM
To: Justine Cox <blumer at jlab.org>; Jacques Barsimantov Mandel <jacquesb at jlab.org>
Cc: pansophy <pansophy at jlab.org>; Naeem Huque <huque at jlab.org>; Kirk Davis <kdavis at jlab.org>
Subject: EIC197-PR-CHEM-CAV-ACID-R1

Good morning,

The EIC197-PR-CHEM-CAV-ACID-R1<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-289509/EIC197-PR-CHEM-CAV-ACID-R1.pdf> procedure has been approved and uploaded to DocuShare. Some of your travelers had the AUP version of the procedure linked previously before either being updated to one of two SRF-MSPR procedures, or requested that  this new procedure be created. I wanted to reach out and see if either EIC197-FAB-FPWA-ASSY<https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=EIC197&area=EIC197&system=> or EIC197-FAB-FPCWV-ASSY-R1<https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-289344/EIC197-FAB-FPCWV-ASSY-R1.docx> needed the new procedure swapped in. I've been instructed that this can be considered an administrative update and can be done without stopping the approval process or putting out a new approval.

One note, because EIC197-FAB-FPCWV-ASSY has the old AUP procedure in it, it will need to be updated no matter what. The question is should it be the two master procedures used previously, or the new EIC197 procedure. EIC197-FAB-FPWA-ASSY can be left as is if the two master procedures are acceptable.

Allen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20240910/55e73469/attachment.html>