[Pansophy] Traveler Template Question

[Allen Samuels]

Also it has an unlinked procedure. I can route the two side by side, but I'll need the procedure to put out as well before I put the traveler out. That way we don't have something approved and waiting for a reference.

Allen
________________________________
From: Allen Samuels <samuels at jlab.org>
Sent: Tuesday, July 8, 2025 9:40 AM
To: Naeem Huque <huque at jlab.org>
Subject: Re: Traveler Template Question

Naeem,

It looks like the pansophy tab on the ribbon is missing. I would recommend using "M:\asd\asddocs\TravelerTemplates\TravelerTemplate2023.dotm" to remake it. Thankfully it looks like a simple copy and paste job (copy the approval rows separate from the rest of the table, it doesn't copy right if you do it all at once). Only other issues I see is that the SN fieldnames should not be descriptive (opposite from what we normally say, I know, but that's the case), and that you don't need the page break at the end. With the former, it should look something like this. [[VHOMSN]] <<VHOMSN>>. If there's multiple, this is one of the few exception to when sequential fieldnames can be used.

Allen
________________________________
From: Naeem Huque <huque at jlab.org>
Sent: Tuesday, July 8, 2025 7:44 AM
To: Allen Samuels <samuels at jlab.org>
Subject: Traveler Template Question

Hi Allen,

Is this in the latest template for the traveler?

Thanks,
Naeem

Naeem Huque
Staff Engineer
Superconducting Radiofrequency (SRF)
Jefferson Lab
12000 Jefferson Ave
Newport News
VA, 23606
Cell: 217-721-5422
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20250708/1d6ed9d7/attachment-0001.htm>