[Pansophy] J26 SLAC Traveler

[Mike Drury]

If its meant to be a vacuum check prior to the truck rolling, I think 
I'd use the warm number, assuming that is a warm number.
Mike


On 3/6/2025 3:48 PM, Ashley Mitchell wrote:
> Which one should I use? 3.50E-07?
>
>
> - Ashley
> ------------------------------------------------------------------------
> *From:* Michael Drury <drury at jlab.org>
> *Sent:* Thursday, March 6, 2025 3:47 PM
> *To:* Ashley Mitchell <ashleya at jlab.org>; Adam Grabowski 
> <adamg at jlab.org>; SRF Pansophy (pansophy at jlab.org) 
> <pansophy at jlab.org>; John Fischer <fischer at jlab.org>; Mike McCaughan 
> <michaelm at jlab.org>
> *Subject:* Re: J26 SLAC Traveler
> The bl vacuum in the traveler is a pre warm up number. The other 
> number may a room temp number.
> Mike D
>
> Sent from my T-Mobile 5G Device
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ------------------------------------------------------------------------
> *From:* Ashley Mitchell <ashleya at jlab.org>
> *Sent:* Thursday, March 6, 2025 3:44:24 PM
> *To:* Adam Grabowski <adamg at jlab.org>; SRF Pansophy 
> (pansophy at jlab.org) <pansophy at jlab.org>; John Fischer 
> <fischer at jlab.org>; Mike McCaughan <michaelm at jlab.org>; Michael Drury 
> <drury at jlab.org>
> *Subject:* Re: J26 SLAC Traveler
> Got it, thanks.
>
> I have a discrepancy in the BL vac prior to shipping (line 28):
>
> You gave me
> 3.50E-07 Torr
>
>
> The traveler pulled: 1200000000 (1.20 e+9)
>
> Assuming we're talking in different units, but want to make sure I 
> include the right number that they are expecting.
>
>
> I'm also still missing: Beamline Vacuum Gauge Serial #
>
> - Ashley
> ------------------------------------------------------------------------
> *From:* Adam Grabowski <adamg at jlab.org>
> *Sent:* Thursday, March 6, 2025 3:27 PM
> *To:* Ashley Mitchell <ashleya at jlab.org>; SRF Pansophy 
> (pansophy at jlab.org) <pansophy at jlab.org>; John Fischer 
> <fischer at jlab.org>; Mike McCaughan <michaelm at jlab.org>; Michael Drury 
> <drury at jlab.org>
> *Subject:* Re: J26 SLAC Traveler
> Ashley,
>
> I did a manual data mine and updated the PL Measurement tab. Can you 
> copy and paste this into the official copy?
>
> Thanks,
>
>
> Adam Grabowski
>
> SRF Test Engineer, L2HE Project CAM
>
> Jefferson Lab
> 600 KELVIN DR Suite # 8
>
> Mail Stop 55H
> Newport News, VA 23606
>
> O: 757-269-7665
>
> C: 360-320-7003
>
> E: adamg at jlab.org
>
> ------------------------------------------------------------------------
> *From:* Ashley Mitchell <ashleya at jlab.org>
> *Sent:* Thursday, March 6, 2025 1:19 PM
> *To:* Adam Grabowski <adamg at jlab.org>; SRF Pansophy 
> (pansophy at jlab.org) <pansophy at jlab.org>; John Fischer 
> <fischer at jlab.org>; Mike McCaughan <michaelm at jlab.org>; Michael Drury 
> <drury at jlab.org>
> *Subject:* Re: J26 SLAC Traveler
> Correction, the traveler for ACTS is closed, but the data wasn't 
> entered, so I'm getting a bunch of blanks and N/As in the report I use 
> for the PL Measurements tab.. If it is stored somewhere else, it's 
> going to have to be manually entered into the spreadsheet, I don't 
> know enough about the data to guess at what should be entered.
>
>
> - Ashley
> ------------------------------------------------------------------------
> *From:* Ashley Mitchell <ashleya at jlab.org>
> *Sent:* Thursday, March 6, 2025 1:17 PM
> *To:* Adam Grabowski <adamg at jlab.org>; SRF Pansophy 
> (pansophy at jlab.org) <pansophy at jlab.org>; John Fischer <fischer at jlab.org>
> *Subject:* Re: J26 SLAC Traveler
> Adam,
>
> The travelers aren't finished with the data, that has to be done so I 
> can pull the PL Measurements from Pansophy.
>
>
> - Ashley
> ------------------------------------------------------------------------
> *From:* Adam Grabowski <adamg at jlab.org>
> *Sent:* Thursday, March 6, 2025 1:11 PM
> *To:* Ashley Mitchell <ashleya at jlab.org>; SRF Pansophy 
> (pansophy at jlab.org) <pansophy at jlab.org>; John Fischer <fischer at jlab.org>
> *Subject:* J26 SLAC Traveler
> Outstanding items:
> -NCR tab
> -PL Measurements (acceptance test data table) tab
> -Alignment data tab
>
> Please update these data fields as soon as possible. The CM is already 
> in route for delivery and SLAC is waiting for this traveler.
>
> Let me know if you have questions,
> Thank you,
>
> Adam Grabowski
>
> SRF Test Engineer, L2HE Project CAM
>
> Jefferson Lab
> 600 KELVIN DR Suite # 8
>
> Mail Stop 55H
> Newport News, VA 23606
>
> O: 757-269-7665
>
> C: 360-320-7003
>
> E: adamg at jlab.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20250306/3718a1de/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 143642 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20250306/3718a1de/attachment-0001.png>