[Pansophy] Which EIC591 project

[Mike Dickey]

Hi All,

Yep, this conversation should have taken place 2 weeks ago.  Timely information is critical on our end.  There are now 105 serial numbers attached to the wrong project, EIC591SC instead of EIC591.

Don't worry, I'll see what I can do to fix it.

Just to verify;

  *   Is the EIC591SC project done?
  *   Are all pending parts going into the EIC591 project?

Thanks,

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Peter Owen via Pansophy
Sent: Monday, March 31, 2025 10:55 AM
To: Valerie Bookwalter <bookwalt at jlab.org>
Cc: srfinv at jlab.org; David Savransky <dsavr at jlab.org>; pansophy <pansophy at jlab.org>
Subject: Re: [Pansophy] Which EIC591 project

Hi Valerie,

So far, I've ordered Cernox temperature sensors and pressure gauges. These are all off-the-shelf parts. Quantities and part numbers are in the table below. The first three lines have already arrived, but I noticed they were entered into Primes under EIC591SC. Hence the email to check.

Let me know if you need any additional info,
Peter

Item
Manufacturer
Part Number
Qty
Cernox CU sensor
Lakeshore
CX-1050-CU-HT-1.4L-QL
96
Cernox LR sensor
Lakeshore
CX-1050-LR-1.4L-QL
9
Pirani Gauge
MKS
275316
2
Cold Cathode Gauge
MKS
104310001
4
Helium Gauge 0-5000 Torr
MKS
627H53TBC1B
6
Helium Gauge 0-100 Torr
MKS
624H12TCECB
2

________________________________
From: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>
Sent: Monday, March 31, 2025 10:43 AM
To: Peter Owen <powen at jlab.org<mailto:powen at jlab.org>>
Cc: srfinv at jlab.org<mailto:srfinv at jlab.org> <srfinv at jlab.org<mailto:srfinv at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: Re: Which EIC591 project

Peter,

Thank you for letting us know.
 EIC591SC (Single Cell) - is only for that DVC cavity work.

So Please use EIC591.
There is a DS Project Area setup and we have plans of putting together the EIC591 traveler area.

This also means I need to get with the Proj Coord to get a PEP Traceability plan together ASAP. Do you have a list of DRAWINGS, REVISIONS, NUMBER OF COMPs exepected?



Valerie Bookwalter

Jefferson Lab, Accelerator Dept.

SRFOPS Software Systems Group

bookwalt at jlab.org<mailto:bookwalt at jlab.org>

757-269-5802



________________________________
From: Peter Owen
Sent: Monday, March 31, 2025 9:36 AM
To: Valerie Bookwalter
Cc: srfinv at jlab.org<mailto:srfinv at jlab.org>
Subject: Which EIC591 project

Hi Valerie,
I have parts arriving for the EIC591 First Article module. When these are loaded into Primes, should they be in the EIC591 project or EIC591SC?
Thanks,



Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20250331/99732538/attachment-0001.html>