[Pansophy] L2HE Warm Coupler Disassembly Procedure

[Mark Weihl]

Allen,

The only thing that stands out is that steps 5.2 through 5.8 need to be completed inside a flow hood.  I know that through a number of assemblies and disassemblies but  someone coming after me may not know this.

Mark
________________________________
From: Allen Samuels <samuels at jlab.org>
Sent: Tuesday, May 27, 2025 4:42 PM
To: Mark Weihl <weihl at jlab.org>; John Fischer <fischer at jlab.org>; Michelle Oast <weinmann at jlab.org>
Cc: pansophy <pansophy at jlab.org>
Subject: L2HE Warm Coupler Disassembly Procedure

Mark,

There was some confusion about your L2HE Warm Coupler Disassembly Procedure you put out back in March. It went through approvals in the Jlab doc repository and was out of Pansophy's control, so we're going back and fixing that. During review I updated it to the latest template, SRF-07-FM-005 SRF OPS Procedure Template R1, so I'd appreciate it if you looked over it quickly to make sure everything got updated correctly. There's a safety area that wasn't in the previous version, but if it's not needed here we can remove it since this is a project level procedure.
I also renamed the ID from L2HE-CM-DASSY-WCPLR-R1 to L2HE-PR-CMA-FPCW-DISA-R1 to better reflect the naming convention order and the acronyms we have in the system and you listed in the traveler. If that is incorrect, please let me know and we can work to correct it.

If you have any questions, please don't hesitate to reach out.

Allen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20250528/be7e9393/attachment.htm>