[Pi0tff] Beamline Configuration Drawings for PRAD II, X17 and TFF

[Eugene Pasyuk]

Ho Bob,

The beamline downstream of HyCak has only one vacuum pump in the downstream alcove. Do you think that's enough? It is a very long pipe, all the way to the dump. Maybe we should add a pump next to the BPM? What do you think?

-Eugene


From: Bob Miller <rmiller at jlab.org>
Sent: Wednesday, November 20, 2024 08:18
To: Eugene Pasyuk <pasyuk at jlab.org>; prad at jlab.org; pi0tff at jlab.org
Cc: Christopher Guthrie <guthrie at jlab.org>
Subject: Re: Beamline Configuration Drawings for PRAD II, X17 and TFF

Good Morning All,

Are there any comments on the layout of PRad II and X17, or do we assume the design is fixed and we can finalize the drawings and prepare to order parts?

Thanks,


Bob Miller
Hall B Lead Engineer
(757) 822-9586
________________________________
From: Eugene Pasyuk <pasyuk at jlab.org<mailto:pasyuk at jlab.org>>
Sent: Thursday, October 31, 2024 3:33 PM
To: prad at jlab.org<mailto:prad at jlab.org> <prad at jlab.org<mailto:prad at jlab.org>>; pi0tff at jlab.org<mailto:pi0tff at jlab.org> <pi0tff at jlab.org<mailto:pi0tff at jlab.org>>
Cc: Bob Miller <rmiller at jlab.org<mailto:rmiller at jlab.org>>; Christopher Guthrie <guthrie at jlab.org<mailto:guthrie at jlab.org>>
Subject: Fw: Beamline Configuration Drawings for PRAD II, X17 and TFF

Here are the beamline drawings for PRad/X17/TFF.
Please review and give your feedback by November 15th.


-Eugene





________________________________
From: Christopher Guthrie <guthrie at jlab.org<mailto:guthrie at jlab.org>>
Sent: Thursday, October 31, 2024 14:47
To: Eugene Pasyuk <pasyuk at jlab.org<mailto:pasyuk at jlab.org>>
Cc: Bob Miller <rmiller at jlab.org<mailto:rmiller at jlab.org>>
Subject: Beamline Configuration Drawings for PRAD II, X17 and TFF


Eugene,

                I have attached .pdf's of the Preliminary versions PRAD II, X17 and TFF Beamline Configuration Drawings.  Can you please send these out to the individual run groups and request comments by November 15th?



Regards,



Chris Guthrie

Hall B Senior Mech. Designer

(757) 269-6922
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pi0tff/attachments/20241120/f93fa661/attachment.html>