[PRad] [Revised Logentry] run 1139 to 1141 , junk run, CODA crashed can not recover

[Serguei Boiarinov]

What CODA configuration did you use last night ?
Is it still 'prad', or something else ?

----- Original Message -----
From: "Mahbub Khandaker" <mahbub at jlab.org>
To: "Serguei Boiarinov" <boiarino at jlab.org>
Cc: "Li Ye" <liye at jlab.org>, prad at jlab.org
Sent: Tuesday, June 7, 2016 10:59:21 AM
Subject: Re: [PRad] [Revised Logentry] run 1139 to 1141 , junk run, CODA crashed can not recover

Yes, Serguei.  We are down now for work in the hall until 3:30 pm.

Thanks,
Mahbub

On Tue, 7 Jun 2016, Serguei Boiarinov wrote:

> Can I take a DAQ to debug it ?
> 
> ----- Original Message -----
> From: "Li Ye" <liye at jlab.org>
> To: "Serguei Boiarinov" <boiarino at jlab.org>, prad at jlab.org
> Sent: Tuesday, June 7, 2016 4:10:02 AM
> Subject: [Revised Logentry] run 1139 to 1141 ,junk run, CODA crashed can not recover
> 
> Logentry Text:
> --
> from 3:00am to 4:00am, we had 15mins beam trip , then CODA crashed, 
> we tried to reset, re-download , re-configured ,re-start CODA , nothing worked.
> we had harp scan at 3:45am  
> error message on ER1 as follow:
> UDP_standard_request >sta:ER1 downloading<
> UDP_standard_request >sta:ER1 downloading<
> UDP_standard_request >sta:ER1 downloading<
> UDP_standard_request >sta:ER1 downloading<
> UDP_standard_request >sta:ER1 downloading<
> UDP_standard_request >sta:ER1 downloading<
> codaUpdateStatus: updating request done
> dbGetInt: ERROR: unknown nrow
> cannot get SPLITMB, set erp->split=2146435072 Bytes
> dbGetInt: ERROR: unknown nrow
> cannot get RECL, set erp->record_length=32768evio format will be used
> got erp->filename >/data/prad/prad<
> INFO: Downloading configuration 'PRAD'
> ++++++======>{CODA}  <
> nrols [0] >CODA<
> INFO: Using inbuilt (CODA) format
> er_et_initialize: start ET stuff
> et_findserver2 1
> et_findserver: send broadcast packet to 129.57.167.255 on port 11111
> et_findserver: send broadcast packet to 10.0.255.255 on port 11111
> et_findserver2 9
> et_findserver: reply to broadcast
> et_findserver: RESPONSE from 129.57.167.227 at 11111 with cast addr = 129.57.167.255 and uname = clondaq4.jlab.org
> et_findserver: comparing 129.57.167.60 to incoming 129.57.167.227
> et_findserver: comparing 10.0.0.3 to incoming 129.57.167.227
> et_findserver: comparing 10.0.0.4 to incoming 129.57.167.227
> et_findserver: comparing 10.0.0.5 to incoming 129.57.167.227
> et_findserver: comparing 10.0.0.6 to incoming 129.57.167.227
> et_findserver: no valid response received
> wait: coda request >download PRAD< in progress
> wait: coda request >download PRAD< in progress
> et ERROR: et_wait_for_system, done waiting but ET system not alive
> et ERROR: etl_open: ET system is not active
> ERROR: er ET init: cannot open ET system
> ERROR: er download: cannot initalize ET system
> 
> 
> 
> ---
> 
> This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3408889
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>