[PRad] [Revised Logentry] run 1139 to 1141 , junk run, CODA crashed can not recover

[Serguei Boiarinov]

'prad' has 'tage' crate in it, do you still need it ?
It is down right now.

----- Original Message -----
From: "Mahbub Khandaker" <mahbub at jlab.org>
To: "Serguei Boiarinov" <boiarino at jlab.org>
Cc: "Li Ye" <liye at jlab.org>, prad at jlab.org
Sent: Tuesday, June 7, 2016 12:04:14 PM
Subject: Re: [PRad] [Revised Logentry] run 1139 to 1141 , junk run, CODA crashed can not recover

CODA configuration was still 'prad' during production run last night.

On Tue, 7 Jun 2016, Serguei Boiarinov wrote:

> What CODA configuration did you use last night ?
> Is it still 'prad', or something else ?
> 
> ----- Original Message -----
> From: "Mahbub Khandaker" <mahbub at jlab.org>
> To: "Serguei Boiarinov" <boiarino at jlab.org>
> Cc: "Li Ye" <liye at jlab.org>, prad at jlab.org
> Sent: Tuesday, June 7, 2016 10:59:21 AM
> Subject: Re: [PRad] [Revised Logentry] run 1139 to 1141 , junk run, CODA crashed can not recover
> 
> Yes, Serguei.  We are down now for work in the hall until 3:30 pm.
> 
> Thanks,
> Mahbub
> 
> On Tue, 7 Jun 2016, Serguei Boiarinov wrote:
> 
> > Can I take a DAQ to debug it ?
> > 
> > ----- Original Message -----
> > From: "Li Ye" <liye at jlab.org>
> > To: "Serguei Boiarinov" <boiarino at jlab.org>, prad at jlab.org
> > Sent: Tuesday, June 7, 2016 4:10:02 AM
> > Subject: [Revised Logentry] run 1139 to 1141 ,junk run, CODA crashed can not recover
> > 
> > Logentry Text:
> > --
> > from 3:00am to 4:00am, we had 15mins beam trip , then CODA crashed, 
> > we tried to reset, re-download , re-configured ,re-start CODA , nothing worked.
> > we had harp scan at 3:45am  
> > error message on ER1 as follow:
> > UDP_standard_request >sta:ER1 downloading<
> > UDP_standard_request >sta:ER1 downloading<
> > UDP_standard_request >sta:ER1 downloading<
> > UDP_standard_request >sta:ER1 downloading<
> > UDP_standard_request >sta:ER1 downloading<
> > UDP_standard_request >sta:ER1 downloading<
> > codaUpdateStatus: updating request done
> > dbGetInt: ERROR: unknown nrow
> > cannot get SPLITMB, set erp->split=2146435072 Bytes
> > dbGetInt: ERROR: unknown nrow
> > cannot get RECL, set erp->record_length=32768evio format will be used
> > got erp->filename >/data/prad/prad<
> > INFO: Downloading configuration 'PRAD'
> > ++++++======>{CODA}  <
> > nrols [0] >CODA<
> > INFO: Using inbuilt (CODA) format
> > er_et_initialize: start ET stuff
> > et_findserver2 1
> > et_findserver: send broadcast packet to 129.57.167.255 on port 11111
> > et_findserver: send broadcast packet to 10.0.255.255 on port 11111
> > et_findserver2 9
> > et_findserver: reply to broadcast
> > et_findserver: RESPONSE from 129.57.167.227 at 11111 with cast addr = 129.57.167.255 and uname = clondaq4.jlab.org
> > et_findserver: comparing 129.57.167.60 to incoming 129.57.167.227
> > et_findserver: comparing 10.0.0.3 to incoming 129.57.167.227
> > et_findserver: comparing 10.0.0.4 to incoming 129.57.167.227
> > et_findserver: comparing 10.0.0.5 to incoming 129.57.167.227
> > et_findserver: comparing 10.0.0.6 to incoming 129.57.167.227
> > et_findserver: no valid response received
> > wait: coda request >download PRAD< in progress
> > wait: coda request >download PRAD< in progress
> > et ERROR: et_wait_for_system, done waiting but ET system not alive
> > et ERROR: etl_open: ET system is not active
> > ERROR: er ET init: cannot open ET system
> > ERROR: er download: cannot initalize ET system
> > 
> > 
> > 
> > ---
> > 
> > This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3408889
> > _______________________________________________
> > PRad mailing list
> > PRad at jlab.org
> > https://mailman.jlab.org/mailman/listinfo/prad
> >
>