[PRad] draft for Volker report

[Dipangkar Dutta]

Hi Ashot,
I agree, we need to add information about the fitting procedure (maybe even
provide the arXiv link if it is already submitted)
 And in that slide there should be a timeline for the expected results.
Cheers
Dipangkar


On Tue, Feb 27, 2018 at 4:40 PM, Eugene Pasyuk <pasyuk at jlab.org> wrote:

> Ashot,
>
> This is not much different from what we have shown before. What everybody
> is waiting from us is the path forward and when we are going to release the
> radius. This is missing on these slides. At least you can add a slide (or
> replace one) saying that we have developed fitting procedure.
>
> -Eugene
>
> ----- Original Message -----
> > From: "Ashot Gasparian" <gasparan at jlab.org>
> > To: "prad" <prad at jlab.org>
> > Sent: Tuesday, February 27, 2018 5:32:04 PM
> > Subject: [PRad] draft for Volker report
>
> > Dear PRad Collaborators,
> >
> > The prepared draft to send to Volker is attached (thanks to Weizhi).
> > Please take a look, I will send it to Volker late this evening.
> >
> > Ashot
> >
> > _______________________________________________
> > PRad mailing list
> > PRad at jlab.org
> > https://mailman.jlab.org/mailman/listinfo/prad
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/prad/attachments/20180227/6cf25ba9/attachment.html>