[PRad] PRad2-X17-DRad weekly meeting this Friday, June 30th at 11:00 AM EDT

Eugene Pasyuk pasyuk at jlab.org
Thu Jun 29 14:22:49 EDT 2023


It is not fully streaming readout yet, it's reading fADC's through the VTP. It is speeding up conventional triggered DAQ readout. We are acquiring the hardware for this and should be able to use it next year. At this time we are not ready yet for triggerless streaming. By the time of the positron beam, we will be able to do a full streaming readout for sure.

-Eugene
________________________________
From: PRad <prad-bounces at jlab.org> on behalf of Bogdan Wojtsekhowski via PRad <prad at jlab.org>
Sent: Thursday, June 29, 2023 13:57
To: Patrick Achenbach <patricka at jlab.org>; gasparan at jlab.org <gasparan at jlab.org>
Cc: Jingyi Zhou <jingyi.zhou at duke.edu>; prad at jlab.org <prad at jlab.org>
Subject: Re: [PRad] PRad2-X17-DRad weekly meeting this Friday, June 30th at 11:00 AM EDT

For the A' search with positron beam the streaming readout is a key.
________________________________
From: PRad <prad-bounces at jlab.org> on behalf of gasparan--- via PRad <prad at jlab.org>
Sent: Thursday, June 29, 2023 1:51 PM
To: Patrick Achenbach <patricka at jlab.org>
Cc: Jingyi Zhou <jingyi.zhou at duke.edu>; prad at jlab.org <prad at jlab.org>
Subject: Re: [PRad] PRad2-X17-DRad weekly meeting this Friday, June 30th at 11:00 AM EDT


  Hi Dipangkar,
 As you know, I am at Mainz Proton radius workshop and preparing to
 take my flight tomorrow morning.
 Please check the MC information in our proposals and answer to Patric's
 question.
 Intuitively, I prefer the second option, the "Streaming Mode" from this
 distance.

 Thanks,
 Ashot

> Dear all,
>
> What is the expected occupancy rate for the HyCal for the different
> experiments?
>
> The reason I ask is that we do have two options for reading out the flash
> ADC as listed below:
>
> - Legacy/Conventional VME readout using the fastest available protocol at
> about 200MB/s
> - "Streaming Mode" where the flash boards are readout over the serial
> backplane to the VXS Trigger Processor.
>
> Patrick
>
> ________________________________________
> From: PRad <prad-bounces at jlab.org> on behalf of Jingyi Zhou via PRad
> <prad at jlab.org>
> Sent: Thursday, June 29, 2023 10:02
> To: prad at jlab.org
> Subject: [PRad] [EXTERNAL] PRad2-X17-DRad weekly meeting this Friday, June
> 30th at 11:00 AM EDT
>
> Dear all,
>
>     We will have our PRad2-X17-DRad weekly meeting this Friday, June 30th
> at 11:00 AM EDT. Here is the zoom link for the meeting:
>
>     https://jlab-org.zoomgov.com/j/16163386292?pwd=M282RW0wSXVqMjYwczl5WlY2SXpzdz09<https://urldefense.com/v3/__https://jlab-org.zoomgov.com/j/16163386292?pwd=M282RW0wSXVqMjYwczl5WlY2SXpzdz09__;!!OToaGQ!teOpSyDHpOkwXOfPIyNx-JaBQQRhZRgUFnMmSDTlWc3M3ayPV0znwYYrSCJGw4bwiviLnrDRfCfkI6WU0q1JZqsLKqG9$>
>
>     Meeting ID: 161 6338 6292
>     Passcode: 921642
>
> Jingyi
>
>
> _______________________________________________
> PRad mailing list
> PRad at jlab.org
> https://mailman.jlab.org/mailman/listinfo/prad
>


_______________________________________________
PRad mailing list
PRad at jlab.org
https://mailman.jlab.org/mailman/listinfo/prad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/prad/attachments/20230629/d2cc5ea0/attachment-0001.html>


More information about the PRad mailing list