[Rgc] raster parameters

[Carlos Ayerbe Gayoso]

I see... yes, that is the reason...

>The period of course should be 5 s (although it’s not entirely clear what the tradeoffs are and what the best period is). I suspect it ended up being 1 s because the shift experts >read only part of the short-term schedule which instructed them to FIRST re-initialize the raster driver (as you recommended) and then to set the value back to 5 s (that part got >skipped). No big deal, I hope.

> - Sebastian


On Jun 19, 2022, at 2:40 PM, Eugene Pasyuk <pasyuk at jlab.org<mailto:pasyuk at jlab.org>> wrote:

I see raster parameters are set to Vpp=2 V for both X and Y, offsets are both set to 0 V, and the period is set to 1 second (used to be 5 s). I don’t see in the logbook when the period was changed from 5 to 1 s.
Are these final parameters we are going to use? If so, they should be reflected on the wiki and on the whiteboard.

-Eugene

_______________________________________________
Rgc mailing list
Rgc at jlab.org<mailto:Rgc at jlab.org>
https://mailman.jlab.org/mailman/listinfo/rgc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/rgc/attachments/20220619/ffd95ca0/attachment-0001.html>