<div dir="ltr">Hi All,<div><br></div><div>As I have been showing at the meetings, one module on the BB XY layer has suddenly decreased in efficiency since GMn ended without anyone physically touching it. See my most recent update at the link below.</div><div><br></div><div><a href="https://sbs.jlab.org/DocDB/0002/000293/003/BB_XY_Layer_Issue_8_31_22.pdf">https://sbs.jlab.org/DocDB/0002/000293/003/BB_XY_Layer_Issue_8_31_22.pdf</a><br></div><div><br></div><div>Right now our best guess is that something inside the GEM may be blocking the flow. We tried turning up the flow but saw negligible improvements and it is risky to keep increasing the flow. We also may want to turn up the flow high for several days with no HV on to try to flush things out. With the HV increased to 3742 V the efficiency is only ~8% lower than the other GEM modules. I believe this will be sufficient to run with during GEn and it is not critical to replace this module, given how difficult and risky that would be.</div><div><br></div><div>Best,</div><div>Sean</div></div>