[Solid_ec] Calorimeter dimensions
Paul E. Reimer
reimer at anl.gov
Tue Mar 5 12:33:06 EST 2013
Hello,
So, Here are my calculations on calorimeter module dimensions:
mm
side length 62.50
Block half height
54.13
Black tape thickness (3M)
0.18
Tape Layers
3.00
total tape
0.53
Al Foil (Wikipedia)
0.02
Wrapping tolerance
0.20
Block fabrication tolerance
0.50
Total effect half height
55.38
Effective Side Length 63.95
The following is a possible layout, with a boundary example. The green
outlined modules do not exist. The red and black modules are modules
that are completely outside the r=100 cm boundary. The solid hexagons
contain r=100, with solid red indicating that the center of the module
is greater than 100 and green indicating the center of the module is
less than 100. The three arcs are at 90 cm, 100 cm and 110 cm. The
proposal is to include all solid modules.
Paul
--
Paul E. Reimer +1-630-252-4037 (Argonne Office)
Physics Division Bldg 203 +1-630-252-3903 (Argonne Fax)
9700 S. Cass Ave. +1-630-840-5709 (Fermilab)
Argonne, IL 60439 +1-630-344-9207 (Cell)
USA reimer at anl.gov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/solid_ec/attachments/20130305/ca1d7228/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: djeiccdb.png
Type: image/png
Size: 100588 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/solid_ec/attachments/20130305/ca1d7228/attachment-0001.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reimer.vcf
Type: text/x-vcard
Size: 330 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/solid_ec/attachments/20130305/ca1d7228/attachment-0001.vcf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3219 bytes
Desc: S/MIME Cryptographic Signature
Url : https://mailman.jlab.org/pipermail/solid_ec/attachments/20130305/ca1d7228/attachment-0001.bin
More information about the Solid_ec
mailing list