[Solid_ec] Fwd: layout

[Jin Huang]

Hi Paul,

Thanks for the nice drawings. If you have a file specifying the coordinate
of each hexagon modules, could you send to me? Then Zhiwen and I can put
that in the simulation. 

Thanks,

Jin


__________________________________________

Jin HUANG

Los Alamos National Laboratory
PO Box 1663, MS H846, Los Alamos, NM 87545

Office:(505) 665-2523, Cell:(757) 604-9946
__________________________________________



-----Original Message-----
From: solid_ec-bounces at jlab.org [mailto:solid_ec-bounces at jlab.org] On Behalf
Of Paul E. Reimer
Sent: Wednesday, March 06, 2013 2:26 PM
To: solid_ec at jlab.org
Subject: [Solid_ec] Fwd: layout

Hello,

Attached are some drawings of a layout for calorimeter modules.

Paul



-------- Original Message --------
Subject:     layout
Date:     Wed, 6 Mar 2013 18:21:54 +0000
From:     Guarino, Victor <vjg at anl.gov>
To:     Reimer, Paul E. <reimer at anl.gov>



Hi Paul,

Attached is a drawing of the first end plate and a layout of a quarter
section.  I have the endplates having straight lines rather than arcs so
that I can attached plates.  I'm not showing a plate at the inner radius
right now but I think it would be a good idea to have one for added
strength.  Let's discuss and then I can complete the rest of the barrel.

Vic