[Solid_ec] SoLID EC meeting at 10am
Yi Qiang
yqiang at jlab.org
Wed Mar 20 10:43:26 EDT 2013
Hi Xiaochao,
I think it will be good to keep some safety margin, say a factor of 2.
Actually, in my DAQ design, I left 240 channels (1 FADC for 2 sectors)
for forward scintillator readout. Also finer segmentation will
definitely help relax the requirement on PMTs.
Thanks,
Yi
On 3/19/2013 8:12 PM, Xiaochao Zheng wrote:
> Hi Jin and Yi:
>
> That's good information. Do we need to leave some safety margin, which can easily means 180 or 240 segments?
>
> Xiaochao
>
> ----- Original Message -----
> From: "Jin Huang" <jinhuang at jlab.org>
> To: "Xiaochao Zheng" <xiaochao at jlab.org>
> Cc: "Diancheng Wang" <dwang at jlab.org>, "solid ec" <solid_ec at jlab.org>, "Yi Qiang" <yqiang at jlab.org>
> Sent: Tuesday, March 19, 2013 6:45:16 PM
> Subject: RE: [Solid_ec] SoLID EC meeting at 10am
>
> For 2) : Yi Qiang replied that we need a 5:1 rejection on photons, which translate to ~100 segments from the plot presented today. (NOTE: this is for scintillator pads sitting before the forward calorimeter, not for preshower)
>
> Jin
>
>
> __________________________________________
>
> Jin HUANG
>
> Los Alamos National Laboratory
> PO Box 1663, MS H846, Los Alamos, NM 87545
>
> Office:(505) 665-2523, Cell:(757) 604-9946
> __________________________________________
>
>
>
> -----Original Message-----
> From: Xiaochao Zheng [mailto:xiaochao at jlab.org]
> Sent: Tuesday, March 19, 2013 12:06 PM
> To: jinhuang at jlab.org
> Cc: Diancheng Wang; solid ec
> Subject: Re: [Solid_ec] SoLID EC meeting at 10am
>
> Dear All:
>
> I have completed the minutes for today's meeting, please see:
> http://hallaweb.jlab.org/experiment/PVDIS/SoLID/EC/meetings/SoLID_EC_Weekly_minutes.html#20130319
>
> In preparation for the upcoming SoLID meeting I'd like to set the prioritized to-do list as follows:
>
> 1) Please complete the table at the top. I have assigned names to each.
>
> 2) Jin please check the SIDIS requirement on photon rejection so we can have an idea of the # of sectors required for the Preshower.
>
> 3) I will then email IHEP about our Preshower design and ask for a cost estimate.
>
> 4) Jin and Zhiwen will come up with some draft slides on the EC presentation for this Saturday, based on point #5 of the minutes (use that as an outline). The table will be presented at the beginning as well. Xiaochao would like to have these slides by Thursday noon, to allow some time for working on the slides.
>
> 5) We will then move on to post-meeting to-do's. Some tasks perhaps can be isolated from others. For example the multi-anode PMT used by LHCb. Perhaps this can be done by the William and Mary group?
>
> Thanks and let me know if you want to add anything!
>
> Xiaochao
>
>
>
> ----- Original Message -----
> From: "Jin Huang" <jinhuang at jlab.org>
> To: "Xiaochao Zheng" <xiaochao at jlab.org>, "solid ec" <solid_ec at jlab.org>
> Cc: "Diancheng Wang" <dwang at jlab.org>
> Sent: Tuesday, March 19, 2013 10:48:55 AM
> Subject: RE: [Solid_ec] SoLID EC meeting at 10am
>
> Slides for Mar 19 meeting:
>
> Simulation updates
> https://userweb.jlab.org/~jinhuang/Meeting/2012.12.15%20SoLID%20Collaboratio
> n%20Meeting/Update.pptx
> https://userweb.jlab.org/~jinhuang/Meeting/2012.12.15%20SoLID%20Collaboratio
> n%20Meeting/Update.pdf
>
> Jin
>
>
> __________________________________________
>
> Jin HUANG
>
> Los Alamos National Laboratory
> PO Box 1663, MS H846, Los Alamos, NM 87545
>
> Office:(505) 665-2523, Cell:(757) 604-9946 __________________________________________
>
>
>
> -----Original Message-----
> From: solid_ec-bounces at jlab.org [mailto:solid_ec-bounces at jlab.org] On Behalf Of Xiaochao Zheng
> Sent: Tuesday, March 12, 2013 7:23 AM
> To: solid ec
> Cc: Diancheng Wang
> Subject: [Solid_ec] SoLID EC meeting at 10am
>
> Dear All:
>
> This is a reminder that we will have our weekly SoLID EC meeting at 10am tomorrow. Call in instruction is as follows:
>
> US 866-740-1260 International 303-248-0285 Access code: 8206694
>
> JLab people should meet in room L102.
>
> I will not be there for the whole meeting and Zhiwen will chair the meeting this time.
>
> Cheers,
>
> Xiaochao
>
> ----------------------------------------------------------------------------
> Associate Professor, Department of Physics, University of Virginia
> 382 McCormick Rd, Charlottesville, VA 22904
> Telephone: (434) 243-4032 (during academic year); or (757) 810-2885 (summer)
> Homepage: http://people.virginia.edu/~xz5y/Main.html
> ----------------------------------------------------------------------------
>
>
> _______________________________________________
> Solid_ec mailing list
> Solid_ec at jlab.org
> https://mailman.jlab.org/mailman/listinfo/solid_ec
> _______________________________________________
> Solid_ec mailing list
> Solid_ec at jlab.org
> https://mailman.jlab.org/mailman/listinfo/solid_ec
> _______________________________________________
> Solid_ec mailing list
> Solid_ec at jlab.org
> https://mailman.jlab.org/mailman/listinfo/solid_ec
> _______________________________________________
> Solid_ec mailing list
> Solid_ec at jlab.org
> https://mailman.jlab.org/mailman/listinfo/solid_ec
>
More information about the Solid_ec
mailing list