[Swreq] Software Work Request: hardware change for IBC0L02 comm

[Weiwei Lu]

The new software running on iocin02bcm is complete.  The control of the IBC0L02 Gigatronics power meter is up and running now.
William

----- Original Message -----
From: "Scott Windham" <windham at jlab.org>
To: "Keith Cole" <colek at jlab.org>
Cc: "Trent Allison" <allison at jlab.org>, "Weiwei Lu" <weiwei at jlab.org>, swreq at jlab.org
Sent: Tuesday, September 17, 2013 2:36:37 PM
Subject: Re: Software Work Request: hardware change for IBC0L02 comm

The new PC104 chassis iocin02bcm has been installed and the old gpib converter injgpib2 has been removed. Network and console are configured and in place.
Scott


----- Original Message -----
From: "Keith Cole" <colek at jlab.org>
To: "Weiwei Lu" <weiwei at jlab.org>, swreq at jlab.org
Cc: "Scott Windham" <windham at jlab.org>, "Trent Allison" <allison at jlab.org>
Sent: Friday, September 13, 2013 7:53:45 AM
Subject: Software Work Request: hardware change for IBC0L02 comm

All,
As discussed, we would like to replace the off the shelf GPIB communication hardware with a PC104 setup for the Gigatronics power meter associated with IBC0L02. We have the hardware on hand just need to come up with a name for the ioc so I can submit for an IP. There is a console server close by that we can access. Please let me or Scott know what we want to name this ioc and we can get the ball rolling. Thanks for the help.       


-- 
Keith Cole 
EESICS
Thomas Jefferson National Accelerator Facility
600 Kelvin Drive
Suite 2
Newport News VA 23606
Phone 757-269-5920