From andrewl at jlab.org Wed Apr 22 08:11:08 2026 From: andrewl at jlab.org (Andrew Lumanog) Date: Wed, 22 Apr 2026 12:11:08 +0000 Subject: [Testlablcwusers] Filling MOLLER TM1-4 with LCW Water Message-ID: Good Morning, ????MOLLER Team plans to do pressure tests on each Torris Magnet. We would like to start this morning if possible and fill TM 1 with about 4-gallons of LCW water, then proceed to do a pressure test. We don't plan to energize the magnets. Thus, no heat will be added to the water. If all goes well, The goal is to Fill 1 or 2 TM's each day and do a pressure test. TM 1 - 3 will be about 4 gallons each and TM4 will be about 10 gallons. Does anyone have any questions or concerns if we start this work this morning? Andrew Lumanog EIC Detector Work Coordinator (757)798-3942 -------------- next part -------------- An HTML attachment was scrubbed... URL: From denny at jlab.org Wed Apr 22 08:11:56 2026 From: denny at jlab.org (Philip Denny) Date: Wed, 22 Apr 2026 12:11:56 +0000 Subject: [Testlablcwusers] Filling MOLLER TM1-4 with LCW Water In-Reply-To: References: Message-ID: No Issue...Phil ________________________________ From: Andrew Lumanog Sent: Wednesday, April 22, 2026 8:11 AM To: Matthew Poelker ; Philip Denny ; John Fischer ; testlablcwusers at jlab.org ; Carroll Jones Cc: Joseph Lamont ; Eric Sun Subject: Filling MOLLER TM1-4 with LCW Water Good Morning, ????MOLLER Team plans to do pressure tests on each Torris Magnet. We would like to start this morning if possible and fill TM 1 with about 4-gallons of LCW water, then proceed to do a pressure test. We don't plan to energize the magnets. Thus, no heat will be added to the water. If all goes well, The goal is to Fill 1 or 2 TM's each day and do a pressure test. TM 1 - 3 will be about 4 gallons each and TM4 will be about 10 gallons. Does anyone have any questions or concerns if we start this work this morning? Andrew Lumanog EIC Detector Work Coordinator (757)798-3942 -------------- next part -------------- An HTML attachment was scrubbed... URL: From poelker at jlab.org Wed Apr 22 08:56:00 2026 From: poelker at jlab.org (Matthew Poelker) Date: Wed, 22 Apr 2026 12:56:00 +0000 Subject: [Testlablcwusers] Filling MOLLER TM1-4 with LCW Water In-Reply-To: References: Message-ID: Ok with me too ________________________________ From: Andrew Lumanog Sent: Wednesday, April 22, 2026 8:11 AM To: Matthew Poelker ; Philip Denny ; John Fischer ; testlablcwusers at jlab.org ; Carroll Jones Cc: Joseph Lamont ; Eric Sun Subject: Filling MOLLER TM1-4 with LCW Water Good Morning, ????MOLLER Team plans to do pressure tests on each Torris Magnet. We would like to start this morning if possible and fill TM 1 with about 4-gallons of LCW water, then proceed to do a pressure test. We don't plan to energize the magnets. Thus, no heat will be added to the water. If all goes well, The goal is to Fill 1 or 2 TM's each day and do a pressure test. TM 1 - 3 will be about 4 gallons each and TM4 will be about 10 gallons. Does anyone have any questions or concerns if we start this work this morning? Andrew Lumanog EIC Detector Work Coordinator (757)798-3942 -------------- next part -------------- An HTML attachment was scrubbed... URL: From cutler at jlab.org Wed Apr 22 09:04:10 2026 From: cutler at jlab.org (Adam Cutler) Date: Wed, 22 Apr 2026 13:04:10 +0000 Subject: [Testlablcwusers] Filling MOLLER TM1-4 with LCW Water In-Reply-To: References: Message-ID: Facilities is ok with this plan as well. R/ Adam C. Mechanical Engineer 757-861-5599 ________________________________ From: Testlablcwusers on behalf of Matthew Poelker Sent: Wednesday, April 22, 2026 8:56:00 AM To: Andrew Lumanog ; Philip Denny ; John Fischer ; testlablcwusers at jlab.org ; Carroll Jones Subject: Re: [Testlablcwusers] Filling MOLLER TM1-4 with LCW Water Ok with me too ________________________________ From: Andrew Lumanog Sent: Wednesday, April 22, 2026 8:11 AM To: Matthew Poelker ; Philip Denny ; John Fischer ; testlablcwusers at jlab.org ; Carroll Jones Cc: Joseph Lamont ; Eric Sun Subject: Filling MOLLER TM1-4 with LCW Water Good Morning, ????MOLLER Team plans to do pressure tests on each Torris Magnet. We would like to start this morning if possible and fill TM 1 with about 4-gallons of LCW water, then proceed to do a pressure test. We don't plan to energize the magnets. Thus, no heat will be added to the water. If all goes well, The goal is to Fill 1 or 2 TM's each day and do a pressure test. TM 1 - 3 will be about 4 gallons each and TM4 will be about 10 gallons. Does anyone have any questions or concerns if we start this work this morning? Andrew Lumanog EIC Detector Work Coordinator (757)798-3942 -------------- next part -------------- An HTML attachment was scrubbed... URL: