[BTeam] draft TN on a family of cylindrical correctors

[Jay Benesch]

The pdf with the embedded song sheets made the email too long for the 
mailing list without moderator approval, so here's the one without those 
images.


On 8/27/20 12:46 PM, Jay Benesch wrote:
> Attached please find two pdfs, cylindrical_correctors.pdf and 
> cylindrical_correctorsR1.pdf. The former has cropped song sheets of the 
> spreaders.  Unfortunately, LibreOffice became so non-responsive with 
> these embedded that I had to delete them to finish writing.  R1 has all 
> the text and spaces for smaller drawings which Chase Dubbe is preparing 
> for me.  Matt Poelker is interested in buying some of the 7.5 cm long by 
> 3" ID units ASAP.  I include Joe Meyers for his opinion as to whether 
> this document is sufficient for use as the statement of work for a 
> sole-source RFQ to Milhous, the low bidder on the DS (15 degree bend) 
> replacement.  The DS replacement cost $12K/set and is a bit trickier to 
> wind.
> 
> I discuss in the TN why I expanded the work from Matt's original request 
> to a family with six members, 7.5, 13 and 30 cm long at 1.5" and 3" ID.
> 
> Comments welcome.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: cylindrical_correctorsR1.pdf
Type: application/pdf
Size: 519753 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/bteam/attachments/20200827/5bf5af5b/attachment-0001.pdf>