[Clas12_calcom] [EXTERNAL] Re: Start of RG-E - action needed

[L Smith]

Daniel,

Tonight I reset PCAL/ECAL HV based on RG-K late run pass0 based calibrations and set the CCDB gains to default, as per my RG-D->RG-K procedure, which worked well.  If RG-E starts with inbending fields this will require another HV adjustment after the calibration run, but I anticipated this anyway for 5 pass.  Otherwise tables are ready.  

Regards,
Cole

> On Mar 14, 2024, at 8:34 PM, Daniel Carman via Clas12_calcom <clas12_calcom at jlab.org> wrote:
> 
> Folks,
> 
> The RG-E beam run will be starting as soon as tomorrow during swing shift. Before data
> taking begins, be sure that you have extended your final RG-K Spr24 calibrations out to
> infinity in ccdb for your subsystems. Also be sure that your hardware status tables have
> channel status set to zero to start so that all channel repairs/recoveries are not lost. 
> Please send me email by tomorrow afternoon of the status of your systems.
> 
> Regards,
> Daniel
> 
> ***************************************************************************
> *                                                                                                 
> * Dr. Daniel S. Carman                  e-mail : carman at jlab.org <mailto:carman at jlab.org> 
> * Staff Scientist                          office : (757)-269-5586
> * Jefferson Laboratory                web: http://userweb.jlab.org/~carman  
> *                                                                                                                  
> ***************************************************************************
> 
> 
> 
> 
> 
> _______________________________________________
> Clas12_calcom mailing list
> Clas12_calcom at jlab.org
> https://mailman.jlab.org/mailman/listinfo/clas12_calcom

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/clas12_calcom/attachments/20240314/f4de12d5/attachment-0001.html>