[Clas12_rich] Mirror 5C-Autocad3D measurements

[Amrit Yegneswaran]

hi pablo, 
thank you for doing such a fine job. 
there were concerns regarding the thickness of mirror 5c. 
thank you for taking the initiative and analyzing this mirror in 3-D AutoCAD 
alls well that ends well 
amrit 


From: "Pablo Campero" <campero at jlab.org> 
To: "clas12 rich" <clas12_rich at jlab.org> 
Cc: "Patrizia Rossi" <rossi at jlab.org> 
Sent: Thursday, June 30, 2016 5:12:44 PM 
Subject: [Clas12_rich] Mirror 5C-Autocad3D measurements 

Hello, 

I looked at the Mirror-5C in Auto-CAD-3D, and I've generated all the 3D-points for the edges (See picture attached) to take the measurements and calculating the average thickness of the four sides; as you can see on the attached table. 
The mirror thickness average was 25.08[mm] with a SE of 0.81. Besides I calculated the radio sphere for this coordinates and it gave me a value of 2751.06[mm]. 

Best Regards 
Pablo Campero 
Detector Support Group. 
_______________________________________________ 
Clas12_rich mailing list 
Clas12_rich at jlab.org 
https://mailman.jlab.org/mailman/listinfo/clas12_rich 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/clas12_rich/attachments/20160630/e3568632/attachment.html>