[Clas12_rich] Mirror 5C-Autocad3D measurements

[Pablo Campero]

Hello,

I looked at the Mirror-5C in Auto-CAD-3D, and I've generated all the 3D-points for the edges (See picture attached) to take the measurements and calculating the average thickness of the four sides; as you can see on the attached table.
The mirror thickness average was 25.08[mm] with a SE of 0.81. Besides I calculated the radio sphere for this coordinates and it gave me a value of 2751.06[mm].   

Best Regards
Pablo Campero
Detector Support Group.    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mirror-5C-Measurements table.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 12429 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/clas12_rich/attachments/20160630/3a8da93f/attachment-0001.xlsx>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mirror-5C-Measurements table.pdf
Type: application/pdf
Size: 74387 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/clas12_rich/attachments/20160630/3a8da93f/attachment-0002.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mirror-5C autocad3dModel.pdf
Type: application/pdf
Size: 39276 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/clas12_rich/attachments/20160630/3a8da93f/attachment-0003.pdf>