[Clas12_rich] Small cleanroom drawing

[Marco Mirazita]

Dear Tyler,
an AutoCAD file is ok, even if it is not uptodate, I guess the dimensions 
of the room are not changed. It would also be useful to have a photo of 
the room as it is now.
As for the optical tables, for the test we will need at least 3 meters 
between the mirror to be tested and the photocamera, so a large table 
of say 3.5x1 m2 would be the best. Alternatively, we could have the mirror 
and the photocamera placed on two tables, that could be about 1 m2 each.
Thanks,
Marco



On Fri, 11 Mar 2016, Tyler Lemon wrote:

> Dear Marco,
>
> We have a drawing if the small clean room but it is out-of-date. Do you need only the dimensions of the room or also what is currently inside of it? Also, would you want the drawing in an AutoCAD file or as a pdf?
>
> Regarding the optical table, what size table would you need?
>
> Best regards,
> Tyler
>
> ----- Original Message -----
> From: "Mirazita Marco" <Marco.Mirazita at lnf.infn.it>
> To: "Tyler Lemon" <tlemon at jlab.org>
> Cc: "Mirazita Marco" <marco.mirazita at lnf.infn.it>
> Sent: Friday, March 11, 2016 12:39:59 PM
> Subject: mirror testing
>
> Dear Tyler.
> we are starting the design of the setup for the tests of the mirrors
> inside the small clean room.
> Do you have any picture, drawing or, even better, 3D models of the room?
> It would be very helpful to optimize the setup in the environment we
> will be.
> Also, do you know if there are optical tables that can we use?
> Thank you,
> Marco
>