[Clas12_rich] Small cleanroom drawing

[Marco Mirazita]

Hi Brian,
thank you for this information. It would be nice if you could send to us 
also for the tables some drawing, or may be just the model so that we 
can look for the online documentation.
Thanks,
Marco


Il 2016-03-16 13:31 Brian Eng ha scritto:
> Hi Marco,
> 
> There are two 3'x3' (1" spacing of 1/4-20 threaded holes) optical
> tables that were used for SVT assembly that are in the big cleanroom
> (EEL/124).
> 
> They're not being used right now, but I'm not sure if they're
> scheduled to be used for anything else in the future.
> 
> --
> Brian Eng
> Detector Support Group
> 757-269-6018
> 
> ----- Original Message -----
>> From: "Marco Mirazita" <Marco.Mirazita at lnf.infn.it>
>> To: "Tyler Lemon" <tlemon at jlab.org>
>> Cc: "clas12 rich" <clas12_rich at jlab.org>
>> Sent: Wednesday, March 16, 2016 5:25:16 AM
>> Subject: Re: [Clas12_rich] Small cleanroom drawing
> 
>> Dear Tyler,
>> an AutoCAD file is ok, even if it is not uptodate, I guess the 
>> dimensions
>> of the room are not changed. It would also be useful to have a photo 
>> of
>> the room as it is now.
>> As for the optical tables, for the test we will need at least 3 meters
>> between the mirror to be tested and the photocamera, so a large table
>> of say 3.5x1 m2 would be the best. Alternatively, we could have the 
>> mirror
>> and the photocamera placed on two tables, that could be about 1 m2 
>> each.
>> Thanks,
>> Marco
>> 
>> 
>> 
>> On Fri, 11 Mar 2016, Tyler Lemon wrote:
>> 
>>> Dear Marco,
>>> 
>>> We have a drawing if the small clean room but it is out-of-date. Do 
>>> you need
>>> only the dimensions of the room or also what is currently inside of 
>>> it? Also,
>>> would you want the drawing in an AutoCAD file or as a pdf?
>>> 
>>> Regarding the optical table, what size table would you need?
>>> 
>>> Best regards,
>>> Tyler
>>> 
>>> ----- Original Message -----
>>> From: "Mirazita Marco" <Marco.Mirazita at lnf.infn.it>
>>> To: "Tyler Lemon" <tlemon at jlab.org>
>>> Cc: "Mirazita Marco" <marco.mirazita at lnf.infn.it>
>>> Sent: Friday, March 11, 2016 12:39:59 PM
>>> Subject: mirror testing
>>> 
>>> Dear Tyler.
>>> we are starting the design of the setup for the tests of the mirrors
>>> inside the small clean room.
>>> Do you have any picture, drawing or, even better, 3D models of the 
>>> room?
>>> It would be very helpful to optimize the setup in the environment we
>>> will be.
>>> Also, do you know if there are optical tables that can we use?
>>> Thank you,
>>> Marco
>>> 
>> _______________________________________________
>> Clas12_rich mailing list
>> Clas12_rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/clas12_rich