[d2n-analysis-talk] Updated DB with improved MWDC timing calibration on d2n and CVS

[Brad Sawatzky]

I've update the DB_DIR on d2n and in CVS with Matt's improved MWDC
timing calibrations.

Please update any local or farm databases accordingly.  If you do this
by hand, do not forget to get the updated StartType.pl script too.

(Of course, only crazy people would do this by hand.  Use 'cvs update',
or 'rsync -avP --delete' to avoid introducing hard-to-find bugs or other
weirdness.)

-- Brad

*********************************************************************
posik (March 28 2011)
*********************************************************************
-In DIR 20090206
  - db_BB.MWDC.dat was changed to reflect calibrated t0,drift-time to
    drift distance and wire offsets
-In DIR 20090208
  - db_BB.MWDC.dat was changed to reflect calibrated t0,drift-time to
    drift distance and wire offsets
-In DIR 20090210
  - db_BB.MWDC.dat.0 was changed to reflect calibrated t0,drift-time to
    drift distance and wire offsets BEFORE H2 running and BEFORE MWDC
    threshold change
  - db_BB.MWDC.dat.1 was changed to reflect calibrated t0,drift-time to
    drift distance and wire offsets AFTER H2 running and AFTER MWDC
    threshold change



-- 
Brad Sawatzky, PhD <brads at jlab.org>  -<>-  Jefferson Lab / Hall C / C111
Ph: 757-269-5947  -<>-  Fax: 757-269-5235  -<>- Pager: brads-page at jlab.org
The most exciting phrase to hear in science, the one that heralds new
  discoveries, is not "Eureka!" but "That's funny..."   -- Isaac Asimov