[dsg-eic_dirc] DIRC Laser room air conditioner

[Marc Mcmullen]

Hi Tyler,

The 1T AC is here. I talked to Walt and he said an exhaust port (maybe 6” round) needs to be cut into the wall or ceiling to duct out the heat. Additionally, a fresh air intake will need to be installed.

Once these decisions are made and holes are done facilities management will need to install a drain line.

I suggest having a meeting between the DIRC group and facilities management come out and decide where all the holes need to go.

Also they should consider an exhaust hole for the heat coming from the laser equipment.

Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20230316/240f1a4d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Image.jpeg
Type: image/jpeg
Size: 3379170 bytes
Desc: Image.jpeg
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20230316/240f1a4d/attachment-0003.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Image.jpeg
Type: image/jpeg
Size: 3980314 bytes
Desc: Image.jpeg
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20230316/240f1a4d/attachment-0004.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Image.jpeg
Type: image/jpeg
Size: 3765742 bytes
Desc: Image.jpeg
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20230316/240f1a4d/attachment-0005.jpeg>