[Dsg-halla_ecal] Aluminum heating bars

[Marc Mcmullen]

Thanks Albert.
________________________________
From: shahinya at jlab.org <shahinya at jlab.org>
Sent: Tuesday, September 6, 2022 1:43 PM
To: Marc Mcmullen <mcmullen at jlab.org>
Cc: dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: Re: [Dsg-halla_ecal] Aluminum heating bars

Dear Marc,

Al bars from the sides of the super-module from the bottom and at the top
should protrude from the front of the super module 4 inches.
Where we are planning to install a heater.

Thank you,
Albert

> Hi Bogdon and Albert,
>
> We are reviewing the latest model of the detector stack. Derek has added
> aluminum bars to the stack for the bottom two rows of supermodules (see
> attachment). But the aluminum appears to be flush with the modules, will
> these be extended out in order to apply a heater?
>
> Regards,
> Marc
> _______________________________________________
> Dsg-halla_ecal mailing list
> Dsg-halla_ecal at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-halla_ecal
>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20220906/6f696521/attachment.html>