[Dsg-halla_ecal] [New Logentry] Follow-up Re: Follow-up Re: ECAL controls thermocouple issue

[Marc Mcmullen]

Hi Don,

I have not noted this error when running the GUI on my end. I will look into it.

In the meanwhile, I suggest making adjustments to the PID settings and monitoring the temperatures routinely during the day to see if the error happens.


Marc
________________________________
From: Donald Jones <jonesdc at jlab.org>
Sent: Wednesday, November 1, 2023 8:35 AM
To: Marc Mcmullen <mcmullen at jlab.org>
Subject: Re: [Dsg-halla_ecal] [New Logentry] Follow-up Re: Follow-up Re: ECAL controls thermocouple issue

Hi Marc,
The GUI keeps popping up errors and when it does, the controls stop working. When I came in this morning, there was an error on the screen (it is usually something an issue with a shared variable being unavailable) and the system had cooled down significantly. Perhaps there is a way to deal with non-critical errors such that they don't push a pop-up that requires a click to continue running.
-Don

Donald Jones
Hall A/C Staff Scientist
Jefferson Lab
Newport News, VA
________________________________
From: Dsg-halla_ecal <dsg-halla_ecal-bounces at jlab.org> on behalf of mcmullen--- via Dsg-halla_ecal <dsg-halla_ecal at jlab.org>
Sent: Tuesday, October 31, 2023 7:10 PM
To: dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: [Dsg-halla_ecal] [New Logentry] Follow-up Re: Follow-up Re: ECAL controls thermocouple issue

Follow-up Re: Follow-up Re: ECAL controls thermocouple issue<https://logbooks.jlab.org/entry/4213146>

  *   Edit<https://logbooks.jlab.org/entry/4213146/edit?destination=email/send>
  *   Delete<https://logbooks.jlab.org/entry/4213146/delete?destination=email/send>

Lognumber 4213146<https://logbooks.jlab.org/entry/4213146>. Submitted by mcmullen<https://logbooks.jlab.org/user/mcmullen> on Tue, 10/31/2023 - 19:08<https://logbooks.jlab.org/entries?start_date=1698790089&end_date=1698797289&book=DSGLOG&book=HALOG>.

Logbooks:       DSGLOG<https://logbooks.jlab.org/book/dsglog> HALOG<https://logbooks.jlab.org/book/halog>
Entry Makers:   mcmullen
References:     4213135 - Follow-up Re: ECAL controls thermocouple issue<https://logbooks.jlab.org/entry/4213135>

Reduced setpoint for supermodule channels from 302 and 305 to 299. The higher setpoints are causing the software limit to engage. Will monitor and adjust if necessary.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20231101/51eb5ba0/attachment.html>