[Dsg-halla_ecal] [New Logentry] ECAL heater controls Omega removal

[mcmullen at jlab.org]

Logentry Text:
--
The Omega process controller which measures the bottom of the ECAL heated volume tripped the heater controls for a  second time today. So we removed that Omega from the system while the hall was in controlled access. We switched the bottom thermocouple sensor to the Omega which typically monitors the middle of the heated volume. 

Currently, the bottom and top of the heated volume are monitored by the Omegas and will trip the heaters off if the temperature exceeds 290 degrees C. 

The EPICS signal HAECAL:HEATCON:ambient_temp:omega_front_middle = the temperature at the bottom of the heated volume
The EPICS signal HAECAL:HEATCON:ambient_temp:omega_front_top = the temperature at the top of the heated volume

We will fix the PV readout during an extended opening (schedule for the coming week)

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/4360430
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20250418/8738dd8f/attachment.htm>