[Dsg-halla_gas] Prototype Gas Distribution System

[kagnanvo]

Hi again Marc,

Just to clarify a few things once again. So right the rack is in EEL125 
and you want us to move it to TEDF right?

I can see that with Chuck tomorrow then

Then after that I will have to get in touch with you for setting the 
raspberry pi and the associate software.

We will have to also set up a mechanism to calibrate the gas flow meter 
that you provide with the one we were using in EEL124 clean room.

Can we install temporarily one of our flow meter on the panel to perform 
this calibration?

Bets regards

Kondo


On 12/14/2020 10:44 AM, Marc Mcmullen wrote:
> Good Morning Kondo,
>
> I am just checking on how the installation of the UVA GEM is going. 
> Please let me know when the Gas Distribution panel moves to the TEDF 
> and provide me with the room location and I will make arrangements to 
> connect the Raspberry Pi and start the gas flow readback software.
>
> Regards,
> Marc
> ------------------------------------------------------------------------
> *From:* Marc Mcmullen <mcmullen at jlab.org>
> *Sent:* Wednesday, December 9, 2020 2:26 PM
> *To:* Gnanvo, Kondo (kg6cq) <kg6cq at virginia.edu>; 
> dsg-halla_gas at jlab.org <dsg-halla_gas at jlab.org>
> *Cc:* nilanga at virginia.edu <nilanga at virginia.edu>
> *Subject:* Re: Prototype Gas Distribution System
> Hi Kondo,
>
> The prototype GEM gas distribution rack  (8 channels) will be ready to 
> be moved tomorrow morning. I know you have some other items to take 
> care of with the move and cabling of the GEM. Please send me an update 
> after the rack has been moved with the room location of the rack.
>
> At that time I will arrange to travel to the lab and connect the 
> Raspberry Pi and start the flow readout software.
>
>
> Let me know if you have any questions.
>
> Regards,
> Marc
> ------------------------------------------------------------------------
> *From:* Gnanvo, Kondo (kg6cq) <kg6cq at virginia.edu>
> *Sent:* Tuesday, December 8, 2020 9:20 AM
> *To:* Marc Mcmullen <mcmullen at jlab.org>; dsg-halla_gas at jlab.org 
> <dsg-halla_gas at jlab.org>
> *Cc:* nilanga at virginia.edu <nilanga at virginia.edu>
> *Subject:* [EXTERNAL] Re: Prototype Gas Distribution System
> Hi Marc,
> Thanks for the update.
> We are also moving the GEM layer to TEDF on Wednesday (tomorrow). 
> After that, I anticipate that it will take a few days to have it 
> completely installed in the bigbite frame (cabling etc ...) and in the 
> meantime, I will arrange with Chuck for the rack and the gas system.
> I will keep you informed
> Best regards
> Kondo
> ------------------------------------------------------------------------
> *From:* Marc Mcmullen <mcmullen at jlab.org>
> *Sent:* Monday, December 7, 2020 3:53 PM
> *To:* dsg-halla_gas at jlab.org <dsg-halla_gas at jlab.org>; Gnanvo, Kondo 
> (kg6cq) <kg6cq at virginia.edu>
> *Subject:* Prototype Gas Distribution System
> Hi Kondo,
>
> DSG is in the process of finalizing the prototype gas system for use 
> in the TEDF. By Wednesday, all components of the Gas Distribution 
> system will be mounted in the rack in EEL 125. At that time we will 
> inform everyone through this mailing list that the rack is ready to be 
> moved to the test location.
>
> At that point the Hall A/UVA contingent should make arrangements to 
> have the rack moved to the test location. Bulk 1/4" gas line will also 
> be left in that area to connect the system to the GEM under test. DSG 
> can provide remote support to connect the gas lines.
>
> After the rack has been moved, please notify me via this mailing list 
> and I will arrange to come and connect the Gas Flow Readback system 
> (Raspberry Pi with software) on the system and test it for 
> functionality. Once this is complete, I will notify everyone of the 
> status.
>
> Regards,
> Marc
>
> _______________________________________________
> Dsg-halla_gas mailing list
> Dsg-halla_gas at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-halla_gas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gas/attachments/20201214/e7b2f83c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BB-Proto-2.JPG
Type: image/jpeg
Size: 689006 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gas/attachments/20201214/e7b2f83c/attachment-0001.jpe>