[Dsg-halla_lappd] LAPPD LED box

[Pablo Campero Rojas]

Hello Simona,

The 3D printed LED box was assembled, and all required accessories are in place.
I'll need the LED cable that you're planning to use so the necessary adjustments can be made to the hole of the LED box base before installing it to the gantry's carrier.
I already have a blue LED with similar specs to the one you were planning to use (attached find the specs), this LED already has the required 1 mm hole at its lens to place the optical fiber and is installed in the LED box.

Let me know your availability.

Regards,
Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_lappd/attachments/20240402/20a5caf7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SSL-LX5093USBD.pdf
Type: application/pdf
Size: 50496 bytes
Desc: SSL-LX5093USBD.pdf
URL: <https://mailman.jlab.org/pipermail/dsg-halla_lappd/attachments/20240402/20a5caf7/attachment-0001.pdf>