[Dsg-halla_lappd] LAPPD LED box

[Pablo Campero Rojas]

Hi Simona,

I will be in my office in the afternoon.

-Pablo
________________________________
From: Simona Malace <simona at jlab.org>
Sent: Tuesday, April 2, 2024 12:15 PM
To: Pablo Campero Rojas <campero at jlab.org>
Subject: Re: LAPPD LED box

Hi Pablo

I would like to get the led you have so I can have the cable be attached to it. When would you be best to stop by your office to get it?

Thanks.

Simona

Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: Dsg-halla_lappd <dsg-halla_lappd-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Tuesday, April 2, 2024 9:53:12 AM
To: dsg-halla_lappd at jlab.org <dsg-halla_lappd at jlab.org>
Subject: [Dsg-halla_lappd] LAPPD LED box

Hello Simona,

The 3D printed LED box was assembled, and all required accessories are in place.
I'll need the LED cable that you're planning to use so the necessary adjustments can be made to the hole of the LED box base before installing it to the gantry's carrier.
I already have a blue LED with similar specs to the one you were planning to use (attached find the specs), this LED already has the required 1 mm hole at its lens to place the optical fiber and is installed in the LED box.

Let me know your availability.

Regards,
Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_lappd/attachments/20240402/a677575c/attachment.html>