[Dsg-halla_magnets] SoLID Magnet- Voltage Taps readout cables

[Pablo Campero Rojas]

Hello Steven,

We are trying to determine the gauge size and voltage rating for the cables that connects the voltage tap signals from the terminal strip to the Dataforth signal conditioning modules  (see attached screenshot for Dwg A00000-16-03-0250 Voltage Tap Wiring Diagram, e.g. cable #250-01), but first we need to know what is the voltage expected in these cables?

Based on the Dataforth module's specs (model: SCM5B31-09D), the voltage input range is from -40 V to +40 V, if the expected voltage (e.g. during a quench event) is greater than 40 V, we will monitor only 40 V and not the actual voltage value. Is this the correct setup to monitor the voltage taps?


-Pablo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20210709/f18d1302/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Voltage tap wiring diagram.JPG
Type: image/jpeg
Size: 78159 bytes
Desc: Voltage tap wiring diagram.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20210709/f18d1302/attachment-0001.jpe>