[Dsg-halla_magnets] CCR Temperature sensor cable selection

[Marc Mcmullen]

Hi Steve,

DSG has concluded research on cables for the CCR temperature sensors. I have attached the SoLID cable selection document. The CCR temperature sensor cables section on the bottom. All three cables meet the requirements listed below:

32 conductors or greater
Rated for 300V
22 – 24 awg
FT1 rated or better


DSG recommends #3, it is the Olympic version of #2 (Belden). Let me know if you concur with this.

Regards,
Marc McMullen
Sr. Instrumentation Designer
Detector Support Group
(757) 269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20210514/ef1e5433/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SoLID Cables_051321.pdf
Type: application/pdf
Size: 465742 bytes
Desc: SoLID Cables_051321.pdf
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20210514/ef1e5433/attachment-0001.pdf>