[Dsg-halla_magnets] Cable routing

[Steven Lassiter]

Hi,

 I would suggest routing the cable that go from the I/O rack to the PLC rack upwards, from the terminal blocks to the top of the I/O racks.
The cables that come from the Magnet to the I/O rack could then be routed from the bottom of the rack up to the terminal strips.
this would reduce the cable density in the plastic cable duct tray.

Could the Dataforth ribbon cable be easily shortened? Between the Dataforth backplane and the breakout panel?

Steven
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20211012/fc4e460e/attachment.html>