[Dsg-halla_magnets] (no subject)

[Marc Mcmullen]

Hi Pablo and Steve,

Mindy has updated the resistors (from 1K ohm to 10K ohm) for the two PT102 CCS boards (#5 and #8) to meet the new current specification for the PT102 sensors.

The current output is ~100 uA, which is the same as the RhFe boards.

I have tested all channels on boards 5 and 8. The boards will have new labels to reflect the current output and test date.

The webpage for the test of all the CCS boards<https://www.jlab.org/sites/default/files/dsg/techDocs/PCB/CCS%20quality%20tests_080322.pdf> has been updated.

The completed boards will be placed in the locker over at the magnet controls rack in the Test Lab.

Regards,
Marc


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220803/0380156e/attachment.html>