[Dsg-halla_magnets] CLEO axial strain gauges

[Steven Lassiter]

Hi,

 Even though the axial strain gauges are not being used for C LEO's low current test runs, I thought it would be  a good idea to verify that they work, the controls wiring is proper and calibrations are done now.

Found that the axial strain gauge cables had  the wrong Tuchels connector on them. They use the 5 pin connector instead of the 6 pin connector that the radial gauges used. The 5 pin free socket end is what will be needed on the ends of the cable coming from the I/O rack.

Should be an easy fix.

Steven


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220803/bd020717/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0658.JPG
Type: image/jpeg
Size: 4010898 bytes
Desc: IMG_0658.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220803/bd020717/attachment-0004.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0659.JPG
Type: image/jpeg
Size: 2732715 bytes
Desc: IMG_0659.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220803/bd020717/attachment-0005.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0660.JPG
Type: image/jpeg
Size: 2721953 bytes
Desc: IMG_0660.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220803/bd020717/attachment-0006.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0657.JPG
Type: image/jpeg
Size: 4571488 bytes
Desc: IMG_0657.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220803/bd020717/attachment-0007.jpe>